Hi! Thanks for the response. You mean the "old" linkage or the "old" dhx2 shock (2020 or prior, kashima coated)??
Old dhx2 (not the 2021) with new linkage (2020 frame) in the "lower" position. Anyway even if I use full travel quite easily, I never actually feel very hard bottom outs on the trail. For the settings I have been using something like 9-10 clicks from fully closed for the high speeds (bump and rebound) and 12 for the low speeds
Thanks!
Last question... How much sag gives you the 500lb spring with 1-2 turns of preload??
Considering that I measure sag being seated with low saddle for consistency, I get 15 mm of sag at the shock (25%). I don't know the exact turns of preload, just enough to prevent the spring from moving.
Thinking of getting a 2019 Rallon,I'm 6" tall and usually ride a large frame would I need an XL,as it seems the rallon comes up a little small.I like a roomy cockpit.TIA.
Thinking of getting a 2019 Rallon,I'm 6" tall and usually ride a large frame would I need an XL,as it seems the rallon comes up a little small.I like a roomy cockpit.TIA.Mmm don't know why that post duplicated.
I ordered early September was due 6th Jan. Orbea stopped exporting to UK for a while. Bike shop says its due this week. Wouldn't be supprised if it's delayed again.
Has anyone else needed to replace the original bottom bracket protector yet? And if you have what did you replace it with. Because I am currently looking for something to replace it with because the glue that was on mine has kind of washed off and now the protector keeps on falling off.
I ordered early September was due 6th Jan. Orbea stopped exporting to UK for a while. Bike shop says its due this week. Wouldn't be supprised if it's delayed again.
Yea its funny or annoying when you see people on FB they got it 1 month before date they had and we are yet still waiting for same model and we had earlier date. I know its corona and all but you get the point.
Has anyone else needed to replace the original bottom bracket protector yet? And if you have what did you replace it with. Because I am currently looking for something to replace it with because the glue that was on mine has kind of washed off and now the protector keeps on falling off.
I've reglued it with Tesa double sided tape for outdoor use (the green colored one). works like charm.
Post Message
Quote
