All mountain wheels: Mavic XA, DT E 1700/1900, Stans Mk3

PB Forum :: All Mountain, Enduro & Cross-Country
All mountain wheels: Mavic XA, DT E 1700/1900, Stans Mk3
Previous Page | Next Page
Author Message
Posted: Oct 26, 2018 at 13:01 Quote
Hi,

I've a Trance 1.5 2016 and need to change wheels. The rear axle is ****** and I take advantage to change the two wheels and extend the rear axle (QR5). I'm looking to gain some rigidity and lose some weight. I weigh 67kg and normally I do rocky trails and occasionally in the bikepark some 2m cuts. Maximum budget between 300 and 400€. Recommendations? At the moment:

- Mavic XA: 30mm, 1.94kg, ASTM 3
- DT Swiss E 1700 or E 1900: 30mm, 1.93kg, ASTM 4

The good thing with the Mavic is that I can find it in my store of confidence.

Can anyone who has a Mavic XA can tell me if they can hold good =2m jumps? In theory ASTM 3 is not recommended for jumps of more than 1m... but I suppose this depends on the weight and I am featherweight... jaja

Thx


 
Your subscriptions
no posts

Copyright © 2000 - 2020. Pinkbike.com. All rights reserved.
dv56 0.005287
Mobile Version of Website