Alloy Bronson V3 cable routing

PB Forum :: Santa Cruz
Alloy Bronson V3 cable routing
Previous Page | Next Page
Author Message
flag Mega-Man
Posted: Feb 23, 2019 at 2:15 Quote
I was convinced today that my Bronson was missing a cable port. The carbon model has three ports (dropper, shifter, brake), the alloy only has two. For those wondering, the dropper gets squashed in with the brake hose. Bit annoying considering the care that went into the carbon model compared to the alloy.

photo

photo

photo

photo
flag guido1975
Posted: Apr 24, 2019 at 10:59 Quote
Thanks for this! I too was sat there stumped as to where the hole was lol
flag SkipSkovhugger
Posted: Apr 25, 2019 at 9:16 Quote
Great and I have the OneUp dropper, which uses the cable housing to actuate the dropper (so the housing moves not the wire).
And I just ordered a Bronson V3 alloy frame...
flag doubledogdare
Posted: Apr 13, 2020 at 18:26 Quote
Anyone Know what diameter cable housing I should order to refresh my shifter cable. 4 or 5 mm.
flag SkipSkovhugger
Posted: Apr 13, 2020 at 22:32 Quote
doubledogdare wrote:
Anyone Know what diameter cable housing I should order to refresh my shifter cable. 4 or 5 mm.

If I remember correctly, shift housing is always 4mm.
The 5mm housing is for cable actuated brakes, which uses the thicker 1.5mm wire (where shift cables are 1.2mm)
flag doubledogdare
Posted: Apr 13, 2020 at 22:45 Quote
If I remember correctly, shift housing is always 4mm.
The 5mm housing is for cable actuated brakes, which uses the thicker 1.5mm wire (where shift cables are 1.2mm)[/Quote]


Thanks for that.. I thought so too but when I went looking I saw some "shifter cables" in both 4 and 5 mm.
flag jagdpanz
O+
Posted: Apr 22, 2020 at 3:40 Quote
photo
This is how it looks in my original build:

5mm hydraulic cable and 4 mm shifter - both in the same hole.
Previous Page | Next Page

 
Copyright © 2000 - 2023. Pinkbike.com. All rights reserved.
dv42 0.021375
Mobile Version of Website