OneUp Dropper Sticking

PB Forum :: Mechanics' Lounge
OneUp Dropper Sticking
| Next Page
Author Message
Posted: Dec 6, 2019 at 13:36 Quote
Just got mine today. Same issues as everyone else... I'll try the remedies this weekend.

Posted: Dec 7, 2019 at 14:09 Quote
I have the same issues with my Oneup Dropper...Confused

Posted: Dec 13, 2019 at 8:41 Quote
Hey Guys,

This tips from OneUp solved my problem, no more "sticky" dropper on the last inch of travel tup

1º Remove the saddle and seat rails to expose the air valve (under s small rubber cover). using a shock pump **with the post at full extension** check the pressure. Operating zone is 280-300psi. I top it right up to 300 then remove the pump.

2º Back off the seat clamp fully and test the action for smoothness and top out. Remember to push the middle / nose of the saddle down not the back of the saddle where all droppers will bind due to the crossing of the load force. Re-tighten only until it just stops moving freely.

You can then reassemble the saddle and test.

Cheers!

| Next Page

 
Copyright © 2000 - 2020. Pinkbike.com. All rights reserved.
dv56 0.004998
Mobile Version of Website