Break in period for push acs3 coilconversion kit?

PB Forum :: All Mountain, Enduro & Cross-Country
Break in period for push acs3 coilconversion kit?
Previous Page | Next Page
Author Message
Posted: May 16, 2019 at 2:03 Quote
Just got my lyrik back from push with the acs3 coil kit. Feels really crunchy.... like the lowers are full of gravel. At first i tried to tell myself to ignore it but its pretty intense. Should i ride it and expect it to break in? Or did they mess something up during installation?

Posted: May 16, 2019 at 4:54 Quote
I would get that checked. A friends ACS3 converted Lyrik is nearly silent so something is definitely not right if there's crunching coming from it. The spring should be easy to remove so I would check if the heat shrink is still in place, as a bare spring can be the source of some horrible noises. Had that issue myself on previous coil forks. Other than that I'm not familiar enough with the Push system to comment further.

Posted: May 16, 2019 at 20:10 Quote
Ive had the Push ACS3 kit in my Lyrik for three months, works great and smooth. never had any noise or any problems

Previous Page | Next Page

Your subscriptions
no posts

Copyright © 2000 - 2019. All rights reserved.
dv56 0.019559
Mobile Version of Website