24" Wheels for Dmr transition 24.

PB Forum :: Dirt Jumping & Street
24" Wheels for Dmr transition 24.
Previous Page | Next Page
Author Message
Posted: May 26, 2019 at 4:18 Quote
Looking for a set of wheels that would fit my dmr. Could i use 24" bmx wheels? Ride mainly trails and parks. Thanks

Posted: May 27, 2019 at 12:04 Quote
It’s easy enough to just build a set. You’ll need 135 rear spacing...not a bmx rear hub.

Posted: Jun 7, 2019 at 15:33 Quote
I ride Odyssey Hazard Lites on my 24. Laced to the hub of your choice. Always been my favorite rim on my bmx bikes. 7KA is also good and comes in 24 I believe.

Posted: Jun 25, 2019 at 10:56 Quote
I need a 10mm bolt up after looking a bit more.. I'm thinking hope pro 2 ss ? Any other suggestions? I'd like to buy both wheels front and rear. 20mm front axel on my djs. Thanks guys

Posted: Jun 25, 2019 at 16:22 Quote
Redemptionrun wrote:
I need a 10mm bolt up after looking a bit more.. I'm thinking hope pro 2 ss ? Any other suggestions? I'd like to buy both wheels front and rear. 20mm front axel on my djs. Thanks guys

Octane One single speed......done!!!!!!

Posted: Jul 4, 2019 at 4:28 Quote
These are the ones I just built up, Octane One on Sun MTX 24
New wheel build. 24 Sun MTX 34 on Octane One Orbital SS hubs

Posted: Jul 4, 2019 at 18:33 Quote
I just built a front 24" and a rebuilt the rear. Mine aren't as pristine and nice as yours, but I prefer to run a wider front. Normally I'd run the same rims front/rear but because I only ever run KHE mac2s l, and they only really come in one width for 24s, I actually built a wheelset to specifically accommodate the tires I know in going to use, lol

Previous Page | Next Page

 
Copyright © 2000 - 2019. Pinkbike.com. All rights reserved.
dv14 0.011202
Mobile Version of Website