Some help with my Fox Float CTD shock W/Autosag.

PB Forum :: Specialized
Some help with my Fox Float CTD shock W/Autosag.
Previous Page | Next Page
Author Message
Posted: Jun 22, 2019 at 12:43 Quote
2016 Stumpjumper FSR ELITE 650B.  Comparatively low miles on the bike.  Less than 1000 total, and I had the shocks serviced a little over a year (~300 Miles) ago.  

Looking for some help/feedback on setting the sag on my bike, and the Autosag feature of my shock. 
To set the sag, I am supposed to pump the shock to 50lbs above my weight when all geared up.  Done. 

Then hop on, get settled, and press the red Autosag valve till it empties.  Done-ish. 

Then cycle the shock a few times up and down, and check the sag.  The sag should be auto set to 25% for me. 

Well, on my shock something different is happening.  When I hit the red Autosag valve it releases all the air in the shock!  Very weird!  Has anyone experienced this? 

Is there an issue with the shock, or the shock operator?  Or, yes to all?  
Thanks for the help

Posted: Aug 22, 2019 at 15:54 Quote
I've had nothing but problems with the Fox CTD shocks. I've came to the conclusion that Fox makes crappy mid to low end shocks to keep their service department employed.

If all else is working, aside from the autosag feature, I'd adjust sag the old fashion way by adjusting the amount of air you're adding/removing.


 
Your subscriptions
no posts

Copyright © 2000 - 2019. Pinkbike.com. All rights reserved.
dv56 0.008576
Mobile Version of Website