Fox 36 with HSC/LSC adjustment

PB Forum :: All Mountain, Enduro & Cross-Country
Fox 36 with HSC/LSC adjustment
Previous Page | Next Page
Author Message
Posted: Jul 19, 2019 at 20:05 Quote
Hey there just curious to what everyone is setting there high and low compression adjustments to? I’m new to fox suspension.

Posted: Jul 21, 2019 at 10:46 Quote
More info required:

Fork model and year.
Bike.
Body weight.
Riding style.
Type of trails.

Etc

Posted: Jul 22, 2019 at 11:50 Quote
2018 Fox 36 performance elite
Small giant reign.
145 pounds.
Fast flowing trails. Than with some good climbs.

Posted: Jul 22, 2019 at 14:24 Quote
Fox has a setup guide online with recommended settings.

Posted: Jul 23, 2019 at 8:41 Quote
Unfortunately I'm not familiar with the later models as regards settings.
But at your body weight I'd check if there are any volume spacers installed and consider removing them completely.

I'm not sure if that model has high speed comp.. if it does open it right up.

Posted: Jul 23, 2019 at 8:55 Quote
If you're talking about the older RC2 damper, the usable range of the lsc adjuster is huge. Don't be afraid to back that thing off more than 14 clicks from closed. I ran way too much lsc thinking it only really had 10 clicks, turns out 12 clicks out is pretty much magic for me. Too much lsc feels really harsh.
I run the high speed 8 clicks out.
Very little rebound, like 4 in from open.
170mm travel and 85-90 psi, I have luftkappe in the older NA airspring. No spacers but luftkappe is like a spacer.
I weigh 170#, 5'11"

Previous Page | Next Page

 
Copyright © 2000 - 2019. Pinkbike.com. All rights reserved.
dv56 0.008408
Mobile Version of Website