Kona Process 153 forum

PB Forum :: Kona
Kona Process 153 forum
Author Message
Posted: Apr 17, 2021 at 14:44 Quote
Putting a megneg on my super deluxe. Does anyone know how to remove this mounting hardware so I can remove the air can off the shock? The hardware seems to be stuck

Posted: Apr 17, 2021 at 19:07 Quote
Parkershark wrote:
Putting a megneg on my super deluxe. Does anyone know how to remove this mounting hardware so I can remove the air can off the shock? The hardware seems to be stuck

You should be able to remove the spacers without much force. Then I used a vise and sockets... with what seemed to me a lot of force to get parts to move.

Posted: Apr 17, 2021 at 20:13 Quote
Parkershark wrote:
Putting a megneg on my super deluxe. Does anyone know how to remove this mounting hardware so I can remove the air can off the shock? The hardware seems to be stuck

https://www.sram.com/en/rockshox/models/tl-rst-bush-a2

I own this tool, makes removing and replacing eyelet bushings a breeze.

Posted: Apr 17, 2021 at 20:17 Quote
A properly sized deep well socket and a rubber mallet will help. Properly brace the end of the shock.

Posted: Apr 19, 2021 at 14:59 Quote
Hi, I'm changing the cranks on my 2015 153 to slx 1x11,. Just looking to confirm before I buy that it is standard not boost I'm looking for?

Posted: Apr 20, 2021 at 23:13 Quote
DanBuchanan wrote:

My works components is EC44-ZS56 on my alloy frame 90mm head tube in medium

So G2 headset is 44/56 ?

Posted: Apr 21, 2021 at 5:59 Quote
Hirta wrote:
DanBuchanan wrote:

My works components is EC44-ZS56 on my alloy frame 90mm head tube in medium

So G2 headset is 44/56 ?

My 2018 G2 AL is 44/56, it's written on the seat tube.

Posted: Apr 21, 2021 at 7:36 Quote
okidou wrote:
Hirta wrote:
DanBuchanan wrote:

My works components is EC44-ZS56 on my alloy frame 90mm head tube in medium

So G2 headset is 44/56 ?

My 2018 G2 AL is 44/56, it's written on the seat tube.

Totally forget that there was information sign under seat tube...Redface

Thx !

Posted: Apr 21, 2021 at 10:31 Quote
Hirta wrote:
okidou wrote:
Hirta wrote:


So G2 headset is 44/56 ?

My 2018 G2 AL is 44/56, it's written on the seat tube.

Totally forget that there was information sign under seat tube...Redface

Thx !

Day 1, I took a picture of it, can always be handy Wink

Posted: Apr 22, 2021 at 1:31 Quote
okidou wrote:
Hirta wrote:
okidou wrote:


My 2018 G2 AL is 44/56, it's written on the seat tube.

Totally forget that there was information sign under seat tube...Redface

Thx !

Day 1, I took a picture of it, can always be handy Wink

I actually have picture of it on my phone, just didn't remember it Facepalm

Posted: Apr 22, 2021 at 1:35 Quote
Kona process 153 2018 who normally has 66 Head angle with 160 fork
I now have 170mm fork
How's that's affect the head angle?

Posted: Apr 22, 2021 at 7:09 Quote
proccesrider wrote:
Kona process 153 2018 who normally has 66 Head angle with 160 fork
I now have 170mm fork
How's that's affect the head angle?

Check this site out: https://bikegeo.muha.cc/

Depends on what fork you have. This will give the comparison for all geo not just HA.

Posted: Apr 22, 2021 at 8:12 Quote
It's the same fork
RockShox lyric just with 170 shaft

Posted: Apr 22, 2021 at 9:19 Quote
Figure about a 65* head angle now.

Posted: Apr 22, 2021 at 9:46 Quote
proccesrider wrote:
It's the same fork
RockShox lyric just with 170 shaft

Ok I did the same thing with my 2020 model. It slackens it 0.5 of a degree to 65.5. I'm also thinking of getting a -1 degree headset to put it in the range of the new 2021s.

170mm fork is what it should have been spec'd with off the start.


 
Copyright © 2000 - 2021. Pinkbike.com. All rights reserved.
dv65 0.042975
Mobile Version of Website