Sexiest Ebike Thread. Please no posting of your own bikes. Discussion is welcome!

PB Forum :: Pinkbike Groups
Sexiest Ebike Thread. Please no posting of your own bikes. Discussion is welcome!
Author Message
Posted: May 6, 2022 at 15:39 Quote
That’s a hard pass. Yikes

Posted: May 6, 2022 at 15:46 Quote
seraph wrote:
We were just talking about that actually. When you turn the bar all the way to the left, the dropper cable actuates.

That should only happen if the cables are too short. My friend has one. Bike looks ok, till you get to this

OMNOM NOM NOM Cables

photo

Posted: May 6, 2022 at 16:04 Quote
AXS can help but not everyone wants that.

Looks terrible on such a nice looking frame too.

Posted: May 6, 2022 at 17:23 Quote
Circe wrote:
seraph wrote:
We were just talking about that actually. When you turn the bar all the way to the left, the dropper cable actuates.

That should only happen if the cables are too short. My friend has one. Bike looks ok, till you get to this

OMNOM NOM NOM Cables

photo

The housings are stock length. We don't install them.

Posted: May 8, 2022 at 7:17 Quote
Fazua ride 60

Hell yes.

Posted: May 8, 2022 at 9:35 Quote
seraph wrote:
Circe wrote:
seraph wrote:
We were just talking about that actually. When you turn the bar all the way to the left, the dropper cable actuates.

That should only happen if the cables are too short. My friend has one. Bike looks ok, till you get to this

OMNOM NOM NOM Cables

photo

The housings are stock length. We don't install them.
Be prepared to replace rusted out headset bearings.

Posted: May 8, 2022 at 9:44 Quote
og-squid-mtb wrote:
seraph wrote:
Circe wrote:


That should only happen if the cables are too short. My friend has one. Bike looks ok, till you get to this

OMNOM NOM NOM Cables

photo

The housings are stock length. We don't install them.
Be prepared to replace rusted out headset bearings.

Why

Posted: May 8, 2022 at 10:19 Quote
I assume he thinks the sealing comes from the upper dust cover and not the bearing seals themselves..

Posted: May 8, 2022 at 11:57 Quote
seraph wrote:
og-squid-mtb wrote:
seraph wrote:


The housings are stock length. We don't install them.
Be prepared to replace rusted out headset bearings.

Why
Because its already happening . Water is leaking through that lame system Transition has .

O+
Posted: May 8, 2022 at 20:16 Quote
Not really an issue, especially in bone dry brentwood

Posted: May 8, 2022 at 20:36 Quote
og-squid-mtb wrote:
seraph wrote:
og-squid-mtb wrote:
Be prepared to replace rusted out headset bearings.

Why
Because its already happening . Water is leaking through that lame system Transition has .

Well I live and work in the PNW so if it's going to happen anywhere, it'll be here.

O+
Posted: May 9, 2022 at 0:42 Quote
Vital saw issues with the headset within their test duration window: https://www.vitalmtb.com/features/Transition-Repeater,3548

Posted: May 9, 2022 at 11:53 Quote
photo

Seatpost(-mast) is part rifle lol

Posted: May 12, 2022 at 6:33 Quote
photo

Bulls bikes

Not bad at all


 


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv65 0.019764
Mobile Version of Website