FloatX2 fit on trek fuel EX8? 2019 model

PB Forum :: Trek
FloatX2 fit on trek fuel EX8? 2019 model
| Next Page
Author Message
Posted: Jun 5, 2021 at 15:51 Quote
For anyone thinking of upgrading 2018 fuel ex with a 210x55 x2. There is zero clearance issues. Just got one mounted up and did the full suspension sweep. I added 3 pics in my pictures if you want to see. Going out tomorrow!

Posted: Jun 16, 2021 at 12:51 Quote
Any body running a trunnion size on the fuel ex 2021 rear ?

Posted: Jul 3, 2021 at 21:06 Quote
trek wrote:
BillyBoy0519 wrote:
I have a 2019 fuel ex8 and i want to change the stock reactiv 210*55 fox dps. I was wondering if a X2 would fit?

With the Fox X2, the body is quite large so there is a chance of it hitting the downtube under full compression. However, the Fox DPX2 would be a better fit and is offered in the same size as your stock length that we designed the bike around, 210x52.5mm. The DPX2 would be a great option if you're looking for more control on the rear end. The X2 is quite favorable for our Slash and Remedy users since it focused for enduro/DH riding.

-Mitch

Posted: Jul 3, 2021 at 21:08 Quote
Question I have a 2021 trek fuel ex 9.7 my question is with the dpx2 what tune would you recommend?

Posted: Jul 6, 2021 at 14:42 Quote
pchappy wrote:
Question I have a 2021 trek fuel ex 9.7 my question is with the dpx2 what tune would you recommend?

Fox offers a tuning guide that we'd suggest using!

https://www.ridefox.com/dl/bike/605-00-159-FLOAT-DPX2-Tuning-Guide-white-revA.pdf

-Mitch

Posted: Jul 21, 2021 at 19:59 Quote
Hopefully Mitch can answer this one!

What hardware would I need to fit a DPX2 on a 2020 Remedy 9.9?

Does it matter if it’s not trunnion if it’s still 230x57.5?

Posted: Jul 22, 2021 at 16:27 Quote
forestrider94 wrote:
Hopefully Mitch can answer this one!

What hardware would I need to fit a DPX2 on a 2020 Remedy 9.9?

Does it matter if it’s not trunnion if it’s still 230x57.5?

For standard pin mounts, we have that hardware available for the Remedy!

Upper: 540755
Lower: 540755

Then you would just need the corresponding bushings from Fox to pair with your shock (60x10mm upper and a 50x10mm lower with a 10mm offset)

-Mitch

Posted: Jul 22, 2021 at 18:38 Quote
Thanks for the reply Mitch! Would these parts be the same if I went with the new Fox Float X that replaces the DPX2?

Posted: Jul 23, 2021 at 7:47 Quote
forestrider94 wrote:
Thanks for the reply Mitch! Would these parts be the same if I went with the new Fox Float X that replaces the DPX2?

Correct!

| Next Page

 
Your subscriptions
no posts

Copyright © 2000 - 2021. Pinkbike.com. All rights reserved.
dv65 0.007667
Mobile Version of Website