Turner suspension bearings: off the shelf?

PB Forum :: Turner
Turner suspension bearings: off the shelf?
Previous Page | Next Page
Author Message
Posted: Jan 25, 2020 at 5:35 Quote
I just bought a 2017 Turner Czar... And Then saw that they had gone out of business. Should have done my research. My big question is: are the suspension bearings proprietary or off the shelf. Also, what readily available grease guns fit the zirks?

Posted: Jan 25, 2020 at 15:33 Quote
LewisMoon wrote:
I just bought a 2017 Turner Czar... And Then saw that they had gone out of business. Should have done my research. My big question is: are the suspension bearings proprietary or off the shelf. Also, what readily available grease guns fit the zirks?

Over on MTBR there is word that they are back, though if you have the bushing-type bearings, I'd order some replacements ASAP. RD hangar as well.

To lubricate them you can use a grease gun like this: or this.
With a needle nose extension like this: I had to put a slight bend in the extension to get at one of the lube points.


 
Copyright © 2000 - 2020. Pinkbike.com. All rights reserved.
dv65 0.004996
Mobile Version of Website