Help me with a DMR Wrath

PB Forum :: DMR
Help me with a DMR Wrath
Previous Page | Next Page
Author Message
Posted: Mar 16, 2020 at 2:55 Quote
So I have picked up a second hand DMR wrath, and want some help setting it up...

Things I want/need to do
- swap out the headset
- install a set of suspension forks
- remote the stuck seatpost

Does anyone have any advice/guidance on any of these? All help gratefully received!!

Posted: Mar 16, 2020 at 4:42 Quote
https://blue.canecreek.com/headset-fit-finder

This will help you figure out the headset dimensions.


For the fork, you will need to find one with a 1 1/8 steer tube, and if buying used ensure that there is enough steer tube length to accommodated the stack height (total height of the bikes head tube, headset, steam and any required spacers).


the seat post could be challenging. Lots of techniques. but start with penetrating oil and letting it sit overnight.... I have everything from heat, to cutting the seat clamp off and having at with an impact wrench.... basically just persistence, leverage and ingenuity.


 
Copyright © 2000 - 2020. Pinkbike.com. All rights reserved.
dv56 0.004742
Mobile Version of Website