Mavic XA Elite 27.5 End Caps

PB Forum :: 27.5/650b
Mavic XA Elite 27.5 End Caps
  • Previous Page
  • Next Page
Author Message
Posted: May 3, 2020 at 11:52 Quote
I have these:

https://shop.mavic.com/en-us/xa-elite-rv1057.html#1028=3283

27.5, boost, Shimano

And I got them used from another user (mkowalski75, great seller btw!). He told me they needed end caps, and I contacted Mavic to order them, but the parts they recommended have descriptions (QRM/TS2) that I don't understand fully. My bike is 15x110 in the front and 12x148 in the back with normal thru-axles, non QR.

Here are the parts Mavic recommended:

Front
https://shop.mavic.com/en-us/front-axle-adapters-oc0671.html#1040=3927

Rear
https://shop.mavic.com/en-us/rear-axle-adapters-oc0672.html#1040=3928

Any help is appreciated confirming these are the right parts before I order them all the way from Mavic. Let me know if you think I should look elsewhere for these parts too. Here's a pic of the wheel sitting on the front thru-axle:

photo

Posted: May 3, 2020 at 11:57 Quote
Wait is "QRM" not "Quick Release Mount" and instead this?

bigquotesQRM – “Qualite Roulements Mavic” – Quality Mavic Ball Bearings. Mavic’s standard sealed cartridge bearings that are used in all of their non-adjustable hubs (below Ksyrium Elite).

Uggh that would actually make sense.


 


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv42 0.007071
Mobile Version of Website