2018 Yeti Sb6 w/ Sram x01 DUB bottom bracket and cranks

PB Forum :: Yeti
2018 Yeti Sb6 w/ Sram x01 DUB bottom bracket and cranks
  • Previous Page
  • Next Page
Author Message
flag Lean1202
Posted: May 5, 2020 at 23:11 Quote
Hi! I wanted to see who's running the same set up mentioned in the title line? I'm running into problems on mine with that set up. SRAM recommends 2mm spacer on the drive side but when the crank is all the way back, it only gives me like 2-3 mm clearance from the rear triangle. and worse, I noticed rub marks from cranks probably when under load or there's a slight flex. Anyone ran into this problem? Would it be okay to try a wider spacer say 3 or 4mm contradicting SRAM's recommendation?

photo
drive side

photo
non-drive side

photo
rub marks from drive side crank

 


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv56 0.009186
Mobile Version of Website