Coil suggestions and information

PB Forum :: Rocky Mountain Bikes
Coil suggestions and information
Previous Page | Next Page
Author Message
Posted: Nov 20, 2020 at 20:42 Quote
I have a 2019 Altitude C70 and would like to go to a coil conversation... What coil does everyone recommend and where does one get offset bushings?

Thank you!

Posted: Nov 22, 2020 at 11:44 Quote
borlowski90 wrote:
I have a 2019 Altitude C70 and would like to go to a coil conversation... What coil does everyone recommend and where does one get offset bushings?

Thank you!

www.offsetbushings.com Smile

Posted: Nov 24, 2020 at 13:27 Quote
I have a 2019 Altitude C70 and run a DHX2 210x55mm but I don't have offset bushings. I didn't install the shock myself as I bought the frame used but it seems all good to me. If I'm doing something wrong I most certainly would like to know. Thanks.

Posted: Nov 30, 2020 at 16:32 Quote
When running an 8.5x2.5, do you go with one or two offset bushings?

Posted: Dec 4, 2020 at 7:36 Quote
borlowski90 wrote:
When running an 8.5x2.5, do you go with one or two offset bushings?
you can only run one offset bushing on the Rocky Mountain bikes as they are not compatible with the bearings on the bottom mount

Posted: Dec 4, 2020 at 13:07 Quote
Thank you, ptrcarson.

Any indication on what rate to run on a 155-160# rider, who enjoys DH flow trails? I was thinking 400#.

Posted: Dec 5, 2020 at 7:20 Quote
borlowski90 wrote:
Thank you, ptrcarson.

Any indication on what rate to run on a 155-160# rider, who enjoys DH flow trails? I was thinking 400#.

I am 255 and run 600-650 when I had coil on my instinct. I ride steep chunk mostly.

Previous Page | Next Page

 
Copyright © 2000 - 2021. Pinkbike.com. All rights reserved.
dv42 0.005166
Mobile Version of Website