Quick Tip: Using one up EDC tool to judge fork sag (ideally 160mm fork)

PB Forum :: All Mountain, Enduro & Cross-Country
Quick Tip: Using one up EDC tool to judge fork sag (ideally 160mm fork)
Previous Page | Next Page
Author Message
flag loudv8noises
O+
Posted: Feb 25, 2021 at 16:02 Quote
I am one of those people who is constantly fiddling with their suspension setup; even on the side of the trail if need be.

I found a little tip utilize the EDC one up tool to judge sag range of a 160mm travel fork that might help some of you out trailside sometime.

The top cap of the One Up EDC tool measures both 32mm (20% sag of 160mm fork) and 25mm (15% of 160mm) across. This means it can be used as a quick "go - no go" gauge for fork sag as this just happens to be the recommended sag range for many 160mm forks.

See here: https://www.mtbr.com/cdn-cgi/image/format=auto,onerror=redirect,width=1920,height=1920,fit=scale-down/https://www.mtbr.com/attachments/oneup-components-edc-lite-on-bike-red-jpg.1879168/
(widest dimension is 32mm, shortest width across is 25mm)

Hope this helps if you forget your ruler at home. Cheers!

 
Copyright © 2000 - 2023. Pinkbike.com. All rights reserved.
dv42 0.013073
Mobile Version of Website