Changing Spring and Travel on 2020/21 Marzocchi Z1 Coil

PB Forum :: Marzocchi
Changing Spring and Travel on 2020/21 Marzocchi Z1 Coil
Previous Page | Next Page
Author Message
Posted: Mar 24, 2021 at 9:45 Quote
Has anyone done this? There doesn’t seem to be much info online and Marzocchi don’t actually have the manual on the website.
Judging by the diagram, spring swap looks easy, it’s just undo top cap, pull out old and put in new having greased it.

If I want to reduce the travel on the fork from 160mm to 150mm (they come as 160 only, it looks like you have to drop the lowers off and swap the spacers round? Not overly complicated but do i need any special tools? Circlip pliers?


Posted: Apr 7, 2021 at 3:40 Quote
You have it correct.

A spring swap just needs the topcap removed and the spring replaced.

A travel change will need the lowers removed but then you just take a spacer from the bottom of the airshaft to the top of the spring

Your subscriptions
no posts

Copyright © 2000 - 2021. All rights reserved.
dv56 0.004596
Mobile Version of Website