2020 Primer crank rubs chainstay...

PB Forum :: Intense
2020 Primer crank rubs chainstay...
Previous Page | Next Page
Author Message
Posted: Apr 2, 2021 at 18:36 Quote
Ok, I picked up a 2020 Primer 275 near the end of last season. If I had to guess it has somewhere between 150 and 200 miles on it. The last few rides I have noticed the drive side crank arm rubs the chainstay when really putting some power down, primarily when pushing hard uphill.
Today I decided to take the rear end apart to make sure everything was in order with the linkage. I did find the lower link bearings on the frame side were a bit rough and replaced them. There was no lateral play, they just spun a little rough.

The cranks themselves are tight and don't seem to have any play either. It's almost as if the frame is beginning to fatigue and flex more over time.

Has anyone had this issue?

Posted: Jul 21, 2021 at 20:29 Quote
Have you contacted Intense about this?
Check out Intense on fb Awesome groupe


 
Copyright © 2000 - 2021. Pinkbike.com. All rights reserved.
dv42 0.005418
Mobile Version of Website