Fox 40 posistion

PB Forum :: Downhill
Fox 40 posistion
Previous Page | Next Page
Author Message
Posted: Apr 14, 2021 at 9:46 Quote
Hi Guys,

This is probably personal preference
But how high or low should i twist my fox 40 stanctions up or down through the upper crown

Obviously the lower the top tube the slacker the head angle,
I have the top of my tubes about 5mm above the top crown.

Im guessing the having the top tubes level with the top crown is the lowest they can go

And i only do uplift assisted bikeparks.


Posted: Apr 16, 2021 at 5:36 Quote
there is no real rule here. The lower crown has to be at a precise height (that you can find in Fox manual), but the upper one is more a preference as you say.
5mm is ok to me.

Posted: Apr 17, 2021 at 9:53 Quote
If your trying to slack and the ha and raise the bb flush with the top crown. But that's not always what you want.

If you want to lower the front, dump the air or pull the spring and bottom out the front end, make sure you have clearance to the bottom crown

Previous Page | Next Page

Copyright © 2000 - 2021. All rights reserved.
dv56 0.004908
Mobile Version of Website