What do I need to bring this Reverb back to life?

PB Forum :: Mechanics' Lounge
What do I need to bring this Reverb back to life?
Previous Page | Next Page
Author Message
Posted: Apr 29, 2021 at 9:35 Quote
I've got most of a Reverb, and hoping to get it working again. It's an externally routed 125mm version. It appears to be holding air pressure, but is currently sat part way through its travel (no lever connected isn't helping). It can be compressed about 10-15mm, which I'm assuming will be fixed with an internal service.

Obviously, hose and fluid are needed, probably a service kit, I'm going that is enough? Unless anyone says otherwise...

http://imgur.com/gallery/17SnVuZ

Posted: Apr 30, 2021 at 9:46 Quote
You'll also need the IFP tool to set depth, then pretty straight forward.

Posted: Apr 30, 2021 at 9:58 Quote
sdken wrote:
You'll also need the IFP tool to set depth, then pretty straight forward.

125mm from memory for that one

Posted: Apr 30, 2021 at 10:32 Quote
Got the IFP tool, so will order the other bits and fingers crossed it's all good!

Posted: Apr 30, 2021 at 22:44 Quote
conan257 wrote:
Got the IFP tool, so will order the other bits and fingers crossed it's all good!

So, it's definitely worth replacing the ifp for the later skf one, I fact that and a basic service kit generally sorts them. I have a couple of spare ifp you can have on for the postage and a pint - PM me

Previous Page | Next Page

 
Copyright © 2000 - 2021. Pinkbike.com. All rights reserved.
dv56 0.005989
Mobile Version of Website