Meta AM29 Hope PF41

PB Forum :: Commencal
Meta AM29 Hope PF41
Previous Page | Next Page
Author Message
Posted: Jul 28, 2021 at 7:18 Quote
Hey there! Want to upgrade my SLX cranks to Hope Evo. Meta frame`s specs say that it has BB92. On the Hope`s site i found two versions of PF41: PF 41(24mm axle) and PF41 30 mm.
Will the PF41 30 mm suit well?
Is it only thing that i will need for my upgrade?
https://www.chainreactioncycles.com/ru/ru/%D0%BA%D0%B0%D1%80%D0%B5%D1%82%D0%BA%D0%B0-hope-pf41-press-fit-30mm/rp-prod135904

Posted: Jul 28, 2021 at 19:48 Quote
It depends of your crank axle size.

I am using a Hope PF41 for 24mm axle with a Shimano XT M8120 crankset on my '20 Meta AM and it works perfectly. The bearings have been a bit rough since the beginning but in my opinion it's the best BB available to keep out of creaky sounds!

Posted: Jul 29, 2021 at 0:27 Quote
deciduous wrote:
It depends of your crank axle size.

I am using a Hope PF41 for 24mm axle with a Shimano XT M8120 crankset on my '20 Meta AM and it works perfectly. The bearings have been a bit rough since the beginning but in my opinion it's the best BB available to keep out of creaky sounds!

So, in my case, if i want to install Hope Evo or Race Face Next R (it has 30 mm axle), i should buy bb from my attached link?

Posted: Jul 29, 2021 at 19:11 Quote
That looks like the one to get for BB92 and a 30mm axle indeed. The link was in Russian but from what I can see this is the same one :

https://www.chainreactioncycles.com/mobile/ca/en/hope-pf41-press-fit-30mm-bottom-bracket/rp-prod135904

The other version that threads together is for 24mm axle only so you have to get the specific version for 30mm axles that you've shown here.

Posted: Jul 30, 2021 at 12:21 Quote
deciduous wrote:
That looks like the one to get for BB92 and a 30mm axle indeed. The link was in Russian but from what I can see this is the same one :

https://www.chainreactioncycles.com/mobile/ca/en/hope-pf41-press-fit-30mm-bottom-bracket/rp-prod135904

The other version that threads together is for 24mm axle only so you have to get the specific version for 30mm axles that you've shown here.

Thank you very much! Already ordered this one and new Hope`s cranks. So much exciting!

Posted: Jul 30, 2021 at 12:34 Quote
And what`s width of cranks? 68-73?

Posted: Aug 11, 2021 at 9:50 Quote
Sorry I was away for a few days! The BB shell's width on my 2020 is 92mm. Just get the proper spindle length cranks for that width from Hope and you'll be good to go.

Previous Page | Next Page

 
Copyright © 2000 - 2021. Pinkbike.com. All rights reserved.
dv42 0.005513
Mobile Version of Website