Magura MT7 leak issue

PB Forum :: Mechanics' Lounge
Magura MT7 leak issue
Previous Page | Next Page
Author Message
Posted: Aug 5, 2021 at 13:18 Quote
Has anyone had any issues with MT7's leaking from the bleed port on the caliper? I bought the brakes new about a month ago. no issues up until this past monday. went for a ride, had no rear brake, lever pulled to the bar and had no power. I bled them, cleaned the pads n rotors and re bedded them. now i have good lever feel but they dont feel as strong. wont lock up the wheel in grass or dry dirt. i noticed today a small amount of fluid under the bleed port that i know wasnt there before.
Thanks for any advice or help

Posted: Aug 5, 2021 at 17:08 Quote
Bleed screw could have a defect in it, and I would imagine your pads are likely contaminated. I would contact Magura Support by phone, they will help you. Their warranty should cover it and turnaround is usually very good.


 
Your subscriptions
no posts

Copyright © 2000 - 2021. Pinkbike.com. All rights reserved.
dv56 0.005450
Mobile Version of Website