Fox transfer / Megatower question.

PB Forum :: Fox Racing Shox
Fox transfer / Megatower question.
  • Previous Page
  • Next Page
Author Message
FL
Posted: Nov 30, 2021 at 1:04 Quote
Hey, i have a 2021 Megatower in Large and want to fit a 200mm Fox transfer - looking to see how much post will be showing when fully inserted in frame - any got a picture? Thanks!

Posted: Nov 30, 2021 at 1:26 Quote
Hi! I'm using a 200mm Oneup on my Megatower L. From seat clamp to lower edge of the post's collar I have about 30mm sticking out.

If you check the total insertion depth of the Transfer vs Oneup on their websites, you'll have your answer. I believe that the fox is slightly longer.

Posted: Nov 30, 2021 at 6:10 Quote
Thepup100 wrote:
Hey, i have a 2021 Megatower in Large and want to fit a 200mm Fox transfer - looking to see how much post will be showing when fully inserted in frame - any got a picture? Thanks!

The 200mm Fox dropper requires over 320mm in order to be fully inserted to the collar. I highly recommend looking at the Santa Cruz site or better yet just contact tech support and ask what the maximum insertion depth is on their seat tube for your size bike.
https://www.fanatikbike.com/blogs/engage/finally-200mm-drop-the-2021-fox-transfer-dropper-post-reviewed
https://www.santacruzbicycles.com/en-US/bikes/megatower-my20

Good luck.

  • Previous Page
  • Next Page

 
Your subscriptions
no posts



Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv42 0.007143
Mobile Version of Website