Fox 38 compression problem

PB Forum :: Mechanics' Lounge
Fox 38 compression problem
Previous Page | Next Page
Author Message
flag evilfollowing
Posted: May 22, 2022 at 19:58 Quote
I was setting up the sag for my fox 38, and noticed that it got 30% sag with a very low pressure (60 psi for 180 lbs rider). I thought the negative chamber was not equalized well, so decided to let go all air slowly and re-pump it.

After all air out and shock pump shows 0 psi, the fox 38 is still VERY still to compress, I even have to lean my body on it to make it move. I tried both lower leg pressure button but it doesn’t help.

Is there anything I can do? I’m wondering where this pressure comes from…
flag eshew
Posted: May 23, 2022 at 10:40 Quote
Don't the lowers have air bleed ports ?
flag evilfollowing
Posted: May 23, 2022 at 14:53 Quote
eshew wrote:
Don't the lowers have air bleed ports ?

Yes, and air bleed ports works! I'm not sure why the ports didn't release the air last night, but after pump the fork again finally the bleed ports works! Thanks!
flag eshew
Posted: May 23, 2022 at 15:39 Quote
Woohoo!! Congrats Smile
flag jpat22
Posted: May 24, 2022 at 5:35 Quote
For what it's worth, I've noticed similar behavior with the ports on my 36. I usually need to push the bleeders in a few times rapidly before they release air. I'm guessing some grease/oil just gums up in there and needs to be cleared before air is released.
Previous Page | Next Page

 
Copyright © 2000 - 2022. Pinkbike.com. All rights reserved.
dv56 0.006072
Mobile Version of Website