Rear wheel offset question

PB Forum :: Road Cycling and Touring
Rear wheel offset question
Previous Page | Next Page
Author Message
Posted: May 28, 2022 at 16:18 Quote
Hi.

I have a MOOTS ROUTT RSL gravel/road bike.

currently built around a ENVE G23 wheelset with 35C tires, which when installed are perfectly centered to the seat stays and chain stays.

However I just got a set of HUNT 35 that I have 30c tires on for those road days. I notice that the tire is almost 3/4" off to the left of the center line of the seat stay and chain stay. Is that normal?

the enve g23 that fit good:
https://imgur.com/a/o4NAJbi


the offset HUNT 35:
https://imgur.com/a/aI9uXmR

I did my best to make sure my lens was aligned with the center of the bike.

Posted: Jun 18, 2022 at 5:03 Quote
That doesn't sound normal, rear wheels are dished. So the spokes are slightly shorter on the cassette freehub side of the wheel when properly setup and trued, that's to make the rim run central to the hub.

So it looks as though it'll need truing.


 
Copyright © 2000 - 2022. Pinkbike.com. All rights reserved.
dv65 0.005137
Mobile Version of Website