Bosch Kiosk re-mount

PB Forum :: eMTB
Bosch Kiosk re-mount
Previous Page | Next Page
Author Message
Posted: Aug 8, 2022 at 13:49 Quote
Looking for suggestions or ideas on re-mount of Bosch Kiosk. It seems like Mondraker didn't think anybody was ever gonna crash there emtb ! I hit a tree today head on (I came out OK) the bike seemed to take the hit very well except the Kiosk popped off. At 1st glance I thought "oh crap my rides done and I'm gonna have to buy a new Kiosk" than I saw the mount looked OK and the Kiosk just popped off. It took me about 10 minutes to find it in high grass, leaves & poison oak. So I'm thinking there has to be a better place to mount this thing & looking for some ideas on new location. Can't figure out how to post a pic.But the Kiosk is mounted pretty much center of bars & sticks out an inch or 2 towards the front wheel.

Posted: Aug 14, 2022 at 10:41 Quote
You can Use the stock arm and just order the interface mount to mount it behind the bars like shimano does. That's what I've done not if they would add heart rate support I could ditch my garmin.

https://www.ebay.com/itm/384695098963

Posted: Aug 15, 2022 at 6:25 Quote
Thanks,
I found a stem mount and ordered one.
https://www.magcad-designs.com/products/magcad-bosch-kiox-e-stem-300-mount

It looks well made and will get the Kiosk back an inch or 2 not perfect but better. I tried messing with the stock mount to get it behind the bars but it ends up upside down or backwards or in very awkward position not sure how that part you gave a link to would help ?

Posted: Aug 15, 2022 at 17:10 Quote
It switches the display around 180 degrees. so instead of the cables coming in the back they now come in the front and the display is still oriented the correct way.

Previous Page | Next Page

 
Your subscriptions
no posts

Copyright © 2000 - 2022. Pinkbike.com. All rights reserved.
dv56 0.007130
Mobile Version of Website