Bring back the Enduro! (Post your Specialized Enduros)

PB Forum :: Post Your Ride
Bring back the Enduro! (Post your Specialized Enduros)
Author Message
Posted: Jul 12, 2018 at 15:03 Quote
My Specialized Enduro 2008 Pro sl Carbon. Bought the frame brand new last month.



Posted: Sep 17, 2018 at 5:01 Quote
Hi Guys,

Had a question I was hoping someone could answer. I have heard you can switch out the linkage on the 2017 Enduro for the 2018 which allows you to lower the BB. Does anyone know if this is true/has done it before?

Thanks!

Posted: Sep 17, 2018 at 6:18 Quote
I’ve got a 2018 Enduro, and I’ve read tons about this linkage. Looks like lots of people have done it and it brings the geo to the 2018 numbers and adds a flip chip (total PITA - you must take the whole rear shock off of the bike to flip) for $50. If you have a torque wrench, this should be an easy swap, plenty of videos and manuals available to walk you through.

Good luck!

Posted: Sep 17, 2018 at 14:24 Quote
norcorider121 wrote:
Hi Guys,

Had a question I was hoping someone could answer. I have heard you can switch out the linkage on the 2017 Enduro for the 2018 which allows you to lower the BB. Does anyone know if this is true/has done it before?

Thanks!
2018 Enduro has less travel. They won't say it, but its true

Posted: Oct 1, 2018 at 12:52 Quote
My Blog entry reviewing, switching the rocker and yoke out on a 2017Specialized Enduro 29 to the 2018 type.

Hopefully it's useful to people thinking about the upgrade. VVV Link below VVV

https://www.pinkbike.com/u/Bungalow-bikes/blog/specailized-enduro-2018-yoke-upgrade-is-it-worth-it.html

Llangollen
2018 Yoke and rocker upgrade review

Posted: Oct 1, 2018 at 12:57 Quote
norcorider121 wrote:
Hi Guys,

Had a question I was hoping someone could answer. I have heard you can switch out the linkage on the 2017 Enduro for the 2018 which allows you to lower the BB. Does anyone know if this is true/has done it before?

Thanks!
https://www.pinkbike.com/u/Bungalow-bikes/blog/specailized-enduro-2018-yoke-upgrade-is-it-worth-it.html

hope this helps.

Posted: Jun 27, 2019 at 23:20 Quote

My Specialized Enduro Elite Carbon 29
Ohlins RFX 36 & TTX suspension
Chromag bars, stem, grips, saddle, chainring & pedals
TRP Quadiem G-Spec brakes, 200mm rotors front & rear
Derby 35i DH rims front & rear, laced to Chris King ISO hubs
GoodYear Newton ST 2.6 DH Ultimate front tire, Newton in the same spec at the rear
Raceface Turbine 170mm Cranks
Sram GX drivetrain with KMC chain

Posted: Nov 10, 2019 at 3:39 Quote
Hey guys . Anyone know if it possible to put a CCDBAIR in a Specialized Enduro Comp 29 2014 ? Ofcourse with the coresponding factory lenght

Posted: Nov 10, 2019 at 4:03 Quote
Yes, it is possible. Check CaneCreek website and their shock finder.

Posted: Dec 12, 2019 at 7:34 Quote
So looking to pick up a 2017 650b Enduro Elite Carbon frame up tomorrow - is there anything i should be looking for on these frames as not had one before but always wanted one? Also, could some point me in the direction of headsets for this frame as struggling to find one at the moment.

Thanks in advance.

Posted: Dec 28, 2019 at 17:18 Quote

2017 Enduro 650b with 2018 linkage/ flip chip

Posted: Mar 2, 2020 at 11:09 Quote
I was wondering if someone could offer me some insight on the 2016 enduro models

I was wondering if any of you know what the difference between the evo and non evo frames were?

I seem to recall previously being told it was just part of the linkage and the front triangle remained the same across the two models?

The reason I ask is I have an enduro evo comp 2016 in a medium, I really like the bike but feel a large would be better suited to me. I've seen a large front triangle online but I think it's for a standard enduro not an evo and I'm wondering wether that would be an issue

I'll post a link below to the part

Cheers

https://www.ebay.co.uk/itm/SPECIALIZED-STUMPJUMPER-ENDURO-2016-RED-LARGE-FRONT-TRIANGLE-FRAME/193365085824?hash=item2d05750e80:g:WQEAAOSwbJlddVS2

Posted: Mar 3, 2020 at 6:21 Quote
Pretty sure it was the front triangles that were different. Although it will probably work. You’ll just end up with something slightly different


 
Copyright © 2000 - 2020. Pinkbike.com. All rights reserved.
dv56 0.007679
Mobile Version of Website