just go to your local shop, ask them if they have any single speed kits, if they do ask them to put it on for you. im getting ss lever and cable for 80
Depends if you're running a BMX 1/8 sprocket. This kind of sprocket is thicker, meaning you need a 1/8 chain. If you're running a deity sprocket, or something similar, it's 3/32 so you'll need a 3/32 chain. (The measurement is the width of the chain/sprocket.)
Depends if you're running a BMX 1/8 sprocket. This kind of sprocket is thicker, meaning you need a 1/8 chain. If you're running a deity sprocket, or something similar, it's 3/32 so you'll need a 3/32 chain. (The measurement is the width of the chain/sprocket.)
Thanks for the post.
We also offer the Termite Sprocket which comes in a 25t and 28t size and is designed around an 1/8" chain.
On Halloween, we will be releasing the new 2009 Alibi Series of Sprockets that are 3/32 and are designed for chainguides (Alibi 4B for a 4B chainguide and the superlight Alibi LT for an LG1 / G2 chainguide).
Depends if you're running a BMX 1/8 sprocket. This kind of sprocket is thicker, meaning you need a 1/8 chain. If you're running a deity sprocket, or something similar, it's 3/32 so you'll need a 3/32 chain. (The measurement is the width of the chain/sprocket.)
oks o si have my ns set up single speen.. but i want to get bmx cranks witch mean i need a bmx sprocket and i no the rear cogs on mtbs have diffrent spacing and stuff on the teeth so i was wondering where i can get a cog with the same spacing as a bmx sprocket