close
Pinkbike is now part of Outside! As of December 3, 2021, please refer to the Outside Terms of Use and Privacy Policy which govern your use of the Pinkbike website and services.

Homemade Parts!

PB Forum :: Mechanics' Lounge
Homemade Parts!
Author Message
Posted: Nov 19, 2019 at 8:36 Quote
TibZ wrote:
latheboy wrote:
$200 is a bit rich? Damn man... That's a custom made part to make your bike better!! That's cheap AF

He said he is a student, i.e., on a budget. It doesn't mean he found the price excessive.

Yes I certinaly dont find the price excessive, in fact its quite the bargain for what you're getting.

However my budget doesnt quite have that much money in it for bike parts at the moment.

Posted: Nov 19, 2019 at 9:12 Quote
no worries man i know exactly how it goes. if i do a batch of a few of them ill shoot you a message and might be able make something work for ya.

Posted: Nov 20, 2019 at 2:08 Quote
Oh shit sorry, I totally missed the student bit. I did stop reading after the words "bit rich". I make stuff too and I get shitty when told I'm too expensive... Carry on ..

Posted: Nov 30, 2019 at 15:52 Quote
Mr-Magura wrote:
walkingtall76 wrote:
Mr-Magura wrote:


You missed out on a rather interesting part.


Magura Smile


Lol- Magura of all you idiocies and ignorance this question by far sets you in the best light. To assume that my retirement has come from patenting a product is so obtuse- it's not even worthy of a response. However, given self contradiction is a terrible thing, I'll suck it up this time. Magura- I'm probably twice your age and that's enough said... as you progress in life you'll realise there's more to it than flashing "fancy" parts on a bike site- good luck, I hope you get to retire soon off of all those idiots that you "cash in on" I'm sure you'll sleep like a baby! Until then- keep keeping the young sheep here interested in your BS. Wink

Well, that's how most engineers I know retired, and how I did so myself.
Your assumptions are roughly as wrong as the rest of the BS you've been spilling here.


Magura Big Grin

Really you retired?

Posted: Dec 1, 2019 at 9:01 Quote
Yes, a few years ago, doing the odd project here and there just to stay in the game.
How are you doing? You've been silent for a while.
Still working with Shibi?


Magura

Posted: Dec 15, 2019 at 14:15 Quote
heres my shifter mount. Made from 6061 ALU flat stock. Going to print one next

downtube shifter mount

Posted: Dec 15, 2019 at 14:56 Quote
That's pretty cool!
Is it for a dirt jump/ slopestyle bike?

Posted: Dec 15, 2019 at 14:57 Quote
matt-15 wrote:
That's pretty cool!
Is it for a dirt jump/ slopestyle bike?
Yes sir

Posted: Dec 18, 2019 at 20:16 Quote
An old pic of a mount I made. this was version one, made v2 a little nicer. maybe I can find a pic.


Posted: Jan 2, 2020 at 14:00 Quote
This one is 31.8 x 35 mm and stack of 29 mm.

Will make 3 lengths of 35, 40, 45 mm for each size bars.
31.8 x 35 mm length and 29 mm stack height. Tomorrow clamps will be finished.
31.8 x 35 mm length and 29 mm stack height. Tomorrow clamps will be finished.

Posted: Jan 2, 2020 at 14:01 Quote
I want mine it 31.8, 35mm and purple! Hook a brother up!! lol

Posted: Jan 2, 2020 at 14:07 Quote
Dude, cant make them purple. Cmon.

Posted: Jan 2, 2020 at 14:16 Quote
numeros wrote:
Dude, cant make them purple. Cmon.

I'd stick to red as well.
That way the blood stains don't seem too obvious.

Magura Smile

Posted: Jan 2, 2020 at 14:23 Quote
numeros wrote:
Dude, cant make them purple. Cmon.

Fine, just send me raw and I can get it ano'ed. I have connections!!

Posted: Jan 3, 2020 at 10:00 Quote
"Dude, cant make them purple. Cmon."

https://shovelcomponents.com/product/oval-fatslim-chainring-104-bcd/

Do you not anodize in house ?


 
Copyright © 2000 - 2022. Pinkbike.com. All rights reserved.
dv56 0.011510
Mobile Version of Website