Do you want to make Pinkbike and Trailforks better? Pinkbike is looking for full time Software Developers - Check Available Jobs

Home Made Bikes

Author Message
Posted: Aug 15, 2019 at 10:00 Quote
I like the use of the 148mm hub with the extra offset.

The chainstay yoke at the bb also looks good, kinda like how Rick Hunter does them.

Posted: Aug 15, 2019 at 10:16 Quote
Great aesthetic!

How's the heel clearance on the seatstays?

Posted: Aug 15, 2019 at 10:43 Quote
I finally finished up my latest project.

The suspension is a copy of the Ancillotti Scarab Evo.

It's first real ride was the EWS80 in Whistler this past weekend.

Posted: Aug 15, 2019 at 11:34 Quote
shirk-007 wrote:
I finally finished up my latest project.
The suspension is a copy of the Ancillotti Scarab Evo.
It's first real ride was the EWS80 in Whistler this past weekend.

Looks slack and FUN! Curious to see a suspension linkage video or something

Posted: Aug 15, 2019 at 13:48 Quote
Golem wrote:
I just finished my own new bike.

Rattle can paint because I like to change...


That's a solid build, good job dude, follow up with us after a couple of rides, looks sick.

Posted: Aug 15, 2019 at 14:39 Quote
shirk-007 wrote:
I finally finished up my latest project.

The suspension is a copy of the Ancillotti Scarab Evo.

It's first real ride was the EWS80 in Whistler this past weekend.

How did she perform?

More downhill orientated? Have no clue!

Posted: Aug 16, 2019 at 8:28 Quote
R-M-R wrote:
Great aesthetic!

How's the heel clearance on the seatstays?

I'd be curious to know this as well. Offsetting towards the drive side makes a lot of sense to me for reducing chain angle, but heal clearance sounds like the crux.

Posted: Aug 19, 2019 at 6:36 Quote
R-M-R wrote:
Great aesthetic!

How's the heel clearance on the seatstays?

More than enough! I used an 83mm BB shell.

Posted: Aug 19, 2019 at 6:44 Quote
@Golem What's the q-factor of the cranks that you're using?

Posted: Aug 19, 2019 at 10:52 Quote
cedrico wrote:
@Golem What's the q-factor of the cranks that you're using?

According to Race Face it is 193 but I'll measure this once I'm back home to be sure.

I measured it and it is 193.

Posted: Aug 19, 2019 at 12:21 Quote
shirk-007 wrote:
I finally finished up my latest project.

The suspension is a copy of the Ancillotti Scarab Evo.

It's first real ride was the EWS80 in Whistler this past weekend.

Looks awesome! What are the geometry numbers?



Just finished painting and rebuilding my highpivot trailbike. I hope, you guys dont get sick of pictures of it. I am just so in love Big Grin this one should be mostly finished now.



Posted: Aug 19, 2019 at 16:24 Quote
Please post it on PB. I'd like to favourite it and send it to the Sexiest AM Bike thread. Please and thank you!

Posted: Aug 19, 2019 at 22:36 Quote
Thank you! I changed the photo in the original post.

Posted: Aug 20, 2019 at 1:04 Quote
Just finished my latest build, 130mm travel 29er hardtail.

25% Sag Geometry

homemade 29er steel hardtail
Just needs cable routing sorting and then ready for paint

Posted: Aug 20, 2019 at 4:03 Quote
Beauty!

What is the purpose of the weld at the top of the seattube?


 
Copyright © 2000 - 2019. Pinkbike.com. All rights reserved.
dv65 0.020745
Mobile Version of Website