I exchanged few e-mails with Will Pegram from MTB Business Development at Ohlins USA. He was super helpfull and totally knew all details of the setup. He advices me to order three parts to convert ex-Specialized Demo shock to one for Wilson.
19311-01 Metal Reducer 16mm to 15mm 18482-01 IGUS Style Bushing 18130-148mm x 25mm spacers
Total cost about 32$
And got answer from devinci where they said that there should not be any freeplay beteeen bolt and shock eyelet but little one between bolt and frame bushings.
I exchanged few e-mails with Will Pegram from MTB Business Development at Ohlins USA. He was super helpfull and totally knew all details of the setup. He advices me to order three parts to convert ex-Specialized Demo shock to one for Wilson.
19311-01 Metal Reducer 16mm to 15mm 18482-01 IGUS Style Bushing 18130-148mm x 25mm spacers
Total cost about 32$
And got answer from devinci where they said that there should not be any freeplay beteeen bolt and shock eyelet but little one between bolt and frame bushings.
2015 carbon frame Wilson. I am finding that after every couple of rides I am wise to pull the seat off & clean up the post & seat tube. If I don't do that and leave the seat in there for a half dozen rides, it is very hard to pull out. Almost like it glues itself in. I don't know if this has been discussed before, but I seem to recall someone saying there is a compound you can apply so it doesn't seize up.
Does anyone know where you can get the rear end bearings for a 2016 wilson I can find a pivot but can’t seem to find the bearings for it I can find a split pivot Bearing set but I’m unsure if the 2016 model is a split pivot thanks for the help
Does anyone know where you can get the rear end bearings for a 2016 wilson I can find a pivot but can’t seem to find the bearings for it I can find a split pivot Bearing set but I’m unsure if the 2016 model is a split pivot thanks for the help
Does anyone know where you can get the rear end bearings for a 2016 wilson I can find a pivot but can’t seem to find the bearings for it I can find a split pivot Bearing set but I’m unsure if the 2016 model is a split pivot thanks for the help
Bearing size out back at the axle is 6903 You can get that bearing size just about anywhere, get one that is 6903 2rs , the 2rs being for 2 rubber seals, one on each side. Should be a couple bucks each.
If you want to do all of the pivot bearings on the wilson you will need 4x 6903, 2x 6805, 2x 6809 bearings. This is the same for all models of wilson from 2011 through to current
Does anyone have any information on how to get one of the rear shock yolk roller bearing bolt I was told they were called that struggling to find one anywhere thanks for the help
Does anyone have any information on how to get one of the rear shock yolk roller bearing bolt I was told they were called that struggling to find one anywhere thanks for the help