2010 Specialized Demo

PB Forum :: Bikes, Parts, and Gear
2010 Specialized Demo
Author Message
flag boris2406
Posted: Jan 28, 2012 at 6:53 Quote
crohnsy wrote:
boris2406 wrote:
HI everyone
I'm from HONG KONG
I bought a new DEMO 8 ll 2010 FRAMES
BUT the REAR WHEEL is close to the right
THE REAR WHEEL NOT ON THE MIDDLE

The reared is offset you need to reddish your wheel to match this offset. Iirc~ 6mm

THANK YOU FOR YOUR HELP
I would offset to left 6mm?!
flag alonso92
Posted: Jan 28, 2012 at 7:03 Quote
joshualovesmtb wrote:
i'm 5 5 what size should i get

small
flag crohnsy
Posted: Jan 28, 2012 at 7:21 Quote
boris2406 wrote:
crohnsy wrote:
boris2406 wrote:
HI everyone
I'm from HONG KONG
I bought a new DEMO 8 ll 2010 FRAMES
BUT the REAR WHEEL is close to the right
THE REAR WHEEL NOT ON THE MIDDLE

The reared is offset you need to reddish your wheel to match this offset. Iirc~ 6mm

THANK YOU FOR YOUR HELP
I would offset to left 6mm?!
Yes.
flag boris2406
Posted: Jan 28, 2012 at 20:19 Quote
And i want to know the Seatposts is 30.9?
flag pierrek
Posted: Mar 9, 2012 at 16:13 Quote
Hi all.

I just bought a 2010 demo 8 (monster edition) frame and looking at getting it built up over this month. I had a couple of questions and will most likely have some more soon.

I need a new rear wheel as mine is currently 150, however Im not sure if this frame take a 135x12 or a 135x10 axle?

Also, similar question to above, the off centre wheel, whats that about, i did some research and i guess this is the dishing but i don't quite get it. does the rear wheel have to be specialy built up or is the 6mm 'dish' incorporated in the frame?


Thanks
flag crohnsy
Posted: Mar 9, 2012 at 16:47 Quote
The axle you will need is 135 x10 or QR135.

When you get the rear wheel you will need it to be dished 6mm to the non drive side.
flag pierrek
Posted: Mar 9, 2012 at 16:49 Quote
crohnsy wrote:
When you get the rear wheel you will need it to be dished 6mm to the non drive side.

Is there a way of doing that to a wheel once its built up or do i need to specifically buy one like that/rebuild the wheel?
flag crohnsy
Posted: Mar 9, 2012 at 16:52 Quote
Yes you bring it to a bike shop and ask them to dish our wheel 6 mm to the non drive side..

I'd bring in your frame too so they can confirm the dish.
flag mtnbkrforlife
Posted: May 29, 2013 at 14:04 Quote
Is there any difference between the 2012 and the 2010 Demo frames?
flag joshualovesmtb
Posted: May 29, 2013 at 17:06 Quote
mtnbkrforlife wrote:
Is there any difference between the 2012 and the 2010 Demo frames?
from 2010-2011/2012 they completely redid the frame

 


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv56 0.012256
Mobile Version of Website