If only Profile put black bolts in that stem vs the silver/chrome.. makes it look cheap and ive been running profile cranks singe the 80s so im a big fan..
The Helm is awesome, very nicely made. Moto clamp is sick!
CK headset pricing is pretty consistent - around $140 USD from most retailers
Yeah the moto clamp is a nice touch. Tighten the top 2 bolts fully then tighten the bottom 2 bolts..Makes it all a bit neater and easier to set up and I guess you have less chance of twisting the face plate and cracking it.
If only Profile put black bolts in that stem vs the silver/chrome.. makes it look cheap and ive been running profile cranks singe the 80s so im a big fan..
Just replace them, personally I'd go for some black ti bolts.
^^^ That's quite the picture of your bar and stem.
Easton Havoc Carbon, North Shore Billet Overlord w/ Titanium bolts. Running a Hope Head Doctor with a Production-Privee top cap and unidirectional carbon spacers.
^^^ That's quite the picture of your bar and stem.
Easton Havoc Carbon, North Shote Billet Overlord w/ Titanium bolts. Running a Hope Head Doctor with a Production-Privee top cap and unidirectional carbon spacers.
The NSB Overlord stem is so nice, had a black one.