show off your Santa Cruz

PB Forum :: Santa Cruz
show off your Santa Cruz
Author Message
Posted: Jan 14, 2021 at 16:15 Quote
gmoss wrote:
Anyone know if the bearings for a HTLT are the same as the same gen HT?

Check the details of the Pro Pack on SC's website, or the schematics in the Bike Archive. Honestly SC has some of the best tech information in the industry.

Posted: Jan 14, 2021 at 16:21 Quote
I am familiar with the archives with drawings, but I did not think they showed bearing specs. Will check again.

Posted: Jan 14, 2021 at 16:27 Quote
gmoss wrote:
I am familiar with the archives with drawings, but I did not think they showed bearing specs. Will check again.

The schematics show bearing numbers.

Posted: Jan 14, 2021 at 16:38 Quote
I see that now. Never paid that close attn. Radial or angular the desired now? Have not really needed or paid attn to that either. Haha

Posted: Jan 14, 2021 at 18:34 Quote
gmoss wrote:
I see that now. Never paid that close attn. Radial or angular the desired now? Have not really needed or paid attn to that either. Haha

At work I have some of the full bearing kits. The HTLT has its own bearing kit part # from the HT v1 and v2 as far as I know. It's been a minute since wrenching a bunch on em.

But just dig deep in the archive and write down the bearing size off there and Google away.

Posted: Jan 17, 2021 at 19:59 Quote
2021 Santa Cruz Hightower V2 CC XTR. Specced with Chris King RS Ultimate suspension etc..
2021 Santa Cruz Hightower V2 CC XTR. Specced with Chris King, RS Ultimate suspension etc..

Posted: Jan 17, 2021 at 20:02 Quote
2021 Santa Cruz Hightower V2 CC XTR. Specced with Chris King RS Ultimate suspension etc..
2021 Santa Cruz Hightower V2 CC XTR. Specced with Chris King, RS Ultimate suspension etc..

Frame is a size large. Got back in August after a X01 demo in the Pisgah ranger district. Magic carpet for sure.

Posted: Jan 17, 2021 at 21:09 Quote
If the Hightower fit a 2.6" tire I would have gotten it over the Tallboy for sure.

Posted: Jan 18, 2021 at 8:06 Quote
Will SC launch a mixed wheel size model for 2021? What do you guys think?

Posted: Jan 18, 2021 at 8:09 Quote
local29 wrote:
Will SC launch a mixed wheel size model for 2021? What do you guys think?

Yeah, probably call it the V10 MX or something

Posted: Jan 18, 2021 at 8:43 Quote
jeremy3220 wrote:
local29 wrote:
Will SC launch a mixed wheel size model for 2021? What do you guys think?

Yeah, probably call it the V10 MX or something

duhWhip

Posted: Jan 18, 2021 at 8:44 Quote
Or maybe the Heckler MX?

Posted: Jan 18, 2021 at 8:48 Quote
seraph wrote:
Or maybe the Heckler MX?

Or Bullit?

Posted: Jan 18, 2021 at 11:33 Quote
Anyone know of a good mudguard for old VPP bikes? (2016 5010)

I found a company that makes one but it's $45.(https://www.phizcycling.com/buynow/muckshield)

Also saw that others have cut up old tubes and zip tied them onto the rear triangle.

Posted: Jan 18, 2021 at 12:20 Quote
Related to Stonant’s post, anyone know of any or have made any good mud guards for new VPP? Specifically megatower


 
Copyright © 2000 - 2021. Pinkbike.com. All rights reserved.
dv65 0.008632
Mobile Version of Website