Hello, Has anyone had any luck replacing their headset on the tues? Mine is a 2019 cf pro race 27.5 and has an acros headset which is useless. I’d like to swap it to something better? Any information is helpful
I dropped Hope bearings in mine. Same model Tues. For some reason the Acros bearing quality isn't great and my steering felt like it had a damper on! Definitely worth swapping out.
Hello, Has anyone had any luck replacing their headset on the tues? Mine is a 2019 cf pro race 27.5 and has an acros headset which is useless. I’d like to swap it to something better? Any information is helpful
I dropped Hope bearings in mine. Same model Tues. For some reason the Acros bearing quality isn't great and my steering felt like it had a damper on! Definitely worth swapping out.
Anyone know if 2018 and 2019 used the same sizes?
Tues CF Pro Race / CF Pro 2019-2020 ZS49 top ZS56 bottom Tues CF Pro Race / CF Pro 2016-2018 IS42 top IS52 bottom
I dropped Hope bearings in mine. Same model Tues. For some reason the Acros bearing quality isn't great and my steering felt like it had a damper on! Definitely worth swapping out.
Anyone know if 2018 and 2019 used the same sizes?
Tues CF Pro Race / CF Pro 2019-2020 ZS49 top ZS56 bottom Tues CF Pro Race / CF Pro 2016-2018 IS42 top IS52 bottom
Thanks!
I can no longer find the various build specs on the YT site.....did you get those there somewhere?
So I've just bought a Tues CF 2017 frame. Can any one tell me the BB and Headset Spec? Not having much look with google!
BB stock was E13. I think frame is pf30 and you need 83mm width and the diameter (24 or 30mm) to match the cranks. https://www.ethirteen.com/products/press-fit-bottom-brackets?variant=29367277191271
Headset stock was Acros AIX-325 which is IS42 upper and IS52 lower. Don’t buy that brand, get a Cane Creek or something else good quality.
So I've just bought a Tues CF 2017 frame. Can any one tell me the BB and Headset Spec? Not having much look with google!
BB stock was E13. I think frame is pf30 and you need 83mm width and the diameter (24 or 30mm) to match the cranks. https://www.ethirteen.com/products/press-fit-bottom-brackets?variant=29367277191271
Headset stock was Acros AIX-325 which is IS42 upper and IS52 lower. Don’t buy that brand, get a Cane Creek or something else good quality.
Thanks so much. I can wait to get this built up! You don't happen to know what the Seat clap size is do you?
So I've just bought a Tues CF 2017 frame. Can any one tell me the BB and Headset Spec? Not having much look with google!
BB stock was E13. I think frame is pf30 and you need 83mm width and the diameter (24 or 30mm) to match the cranks. https://www.ethirteen.com/products/press-fit-bottom-brackets?variant=29367277191271
Headset stock was Acros AIX-325 which is IS42 upper and IS52 lower. Don’t buy that brand, get a Cane Creek or something else good quality.
Thanks so much. I can wait to get this built up! You don't happen to know what the Seat clap size is do you?
I think it is a 35, but I would measure your frame
Sorting out a 2015 tues cf for a mate and hes lost the headset bearings. Any know what size they are?
cheers
I've had a proper nightmare doing my 2017 cf. I ended up with a FSA with a different crown race. Just one i found in my bit box! its not 'right' but it works. Check the "Acros" website it should tell you.
https://acros-components.com/en/yt-industries
Now I just need to sort out the BB!! why is nothing simple!!
My custom YT Tues CF, mixed wheels 29” and 27.5” and Enduro Setup with Fox 38 180mm travel..
YT Tues
Nice! How does it work? Is the front setup much lighter? Still 200mm back? New cassette? Which dropper post?
Works great I luv it! Yes its lighter since Im having the FOx 38, compared to Fox 40 and front wheels are 29er so its Mullet! and yes the rear is 200mm travel but I have it setup as 25% sag, yes cassette is 11 speed 10-50T, my dropper post is only cheap china Zoom dropper but works well for now, I might upgrade it this winter when I have some budget.