An after work project led to the creation of a whole new company, Farside Components.

Cascade Components are branching out from aftermarket links into the world of chain guides.

All sorts of shiny new bikes and components were on display at the Malverns Classic.

Marvin Henschel has dreamt up a plan to produce an enduro bike using a mix of materials with customizable geometry in an efficient, CO2-conscience manufacturing process.

Digit have unveiled an interesting new trail bike that uses a custom rear shock / strut to deliver 140mm of travel.

Shimano's heat dissipating technology will soon be available to riders without Centerlock hubs.

Dropper posts aren't just for adults, which is why PNW Components made one specifically for smaller, lighter riders.

Remember these legendary bikes?

Joey's tribute to Gloria Estefan's Miami Sound Machine.

After some anxious moments, Connor's custom painted bike finally made it to Val di Sole.

Robin Goomes shares how she has her Yeti SB165 set up for the big hits of Audi Nines.

There were all sorts of bikes hitting the jumps for the Mr Whippy Whip Off competition at the Malverns Classic.

'What was that tape doing on her downtube?' and other questions answered about the bike that carried Jolanda Neff to Olympic victory.

Another compilation of drool-worthy downhill bikes.

How much pressure do you want in your fork? All of it.

A quick rundown of Veronique's Santa Cruz V10.

Evil has new epoxy-free carbon rims on the way that are made via an automated process.

The RPC helmet has a new visor design and MIPS for 2022.

The new Blizzard gets a carbon frame and has clearance for 27.5 x 4.5" tires.

Take a look at the bike Caroline will be riding at Audi Nines.

The EVO versions use new calipers and thicker, 2.3mm rotors.

One of the best looking downhill bikes gets a 29er update.

Pinkbike presenter Tom Bradshaw finally got his hands on a bike with front and rear suspension.

The search for speed can be a tricky one.

Another impressive build featuring mainly high-end European components.

There's a new Tracer on the way, although some of the specifics are still up in the air.

This handmade steel creation looks amazing.

Is a slight reduction in efficiency a worthwhile tradeoff?

The 2022 Reign E+ gets a bigger battery, a new motor, and geometry updates.

Dave Weagle's linkage fork design lives on.

A new tire from Schwalbe, and a handful of setup tweaks that may have flown under the radar.

Where do your tire traction priorities lie?

Martin Maes will be taking on Maribor aboard a 160mm enduro bike with a dual crown fork.

All the latest tech from the last month.

And it looks like it's got an entirely new suspension design.

Less travel but with even more capital letters, could the new gravel-focused AXS XPLR dropper also make sense on your mountain bike?

Anamoly is hoping to gain a foothold in the mountain bike shoe market with a new line of flat pedal shoes.

Motocross racewear brand Thor has crossed over into the mountain bike world with the Assist bike collection.

Stanton were showing off this shiny new bike at Ard Rock this weekend.

Hope has confirmed that this is an early prototype of a bike they plan to launch before summer next year.

You can't have a British race without some riders turning up on a hardtail.

Take a closer look at EWS racer Mark Scott's setup for a weekend of racing at Ard Rock.

Should DH bikes weigh less than enduro bikes? Cast your vote to decide what actually constitutes a 'light' bike.

Pinkbike's tech editors answer the questions that keep you up at night.

The clamp can change a bike's virtual seat angle by up to two degrees.

The winners' bikes from the 4X National Championships.

Our initial impressions of this stealthy and speedy new machine.

The new pedals use Hope's own cleat design, and are available in six different colors.

Shimano's Saint and XT flat pedals have been updated, and there's a new SLX composite pedal in the mix.

With 200mm of travel and 29" wheels front and rear, Charlie's bike is built for speed. And sending.

There's no shortage of ventilation on these glasses, but the 3D-printed design sure isn't cheap.