First Ride: 2024 Mondraker Dune eMTB - Punchy, Maneuverable, & Light Enough

Apr 9, 2024
by Jessie-May Morgan  



The Mondraker Dune is the latest mountain bike subject to reappropriation with an electric motor, positioned as the Super Enduro of light(er) e-bikes. This is more overhaul territory, rather than some basic updates, and arguably worthy of a name change. However, the Dune's intentions, at least from a descending standpoint, remain unchanged. While the 2017 iteration was a 27.5" wheeled affair, 2024 sees it switch to a dedicated MX configuration across the S-XL size range, with 165mm of rear wheel travel delivered by the Updated Zero Suspension platform. That's paired with a 170mm or 180mm fork, depending on the model. Most notably, the Dune is home to a 55 Nm Bosch SX motor and a 400 Wh battery, and weighs just shy of 20 kg (43 lbs).

2024 Mondraker Dune Details
• Full Carbon Frame
• 165mm Rear Wheel Travel
• 170/180mm Fork (XR)
• 64°/63.5° head angle
• MX Wheels
• Bosch SX Motor, 55 Nm & 600 W peak power
• 400 Wh battery (250 Wh Range Extender available)
• Weight: 19.92 kg / 42.5 lbs (actual, S)
• Sizes: S, M, L, XL; 440-500 mm reach
• Price: $11,999 USD (Dune XR)
• Lifetime warranty
mondraker.com

Mondraker now offers no fewer than seven full suspension eMTBs, most of which belong to the all-mountain category with 150mm travel and a complete 29" wheelset. Thus, the new Dune is far from the Spanish brand's first rodeo. The most recent addition to the lineup was the Mondraker NEAT, their first foray into the world of light(er) weight eMTBs, or SLs, as they have come to be known. The Dune sits alongside the NEAT as a longer-travel, more powerful SL option.

I got to ride the Dune on the enduro trails around Sintra, Portugal, and have some first ride impressions to share.


photo

Frame Details & Motor

The Mondraker Dune has a carbon frame, inclusive of the rocker link, while the lower link is aluminum. Mondraker has managed to package the Dune with the Bosch SX motor and its 400 Wh battery, while leaving space for both the PowerMore 250 Wh range extender and a water bottle (M-XL, only). Or, if bigger mileage isn't on the agenda, two water bottles.

As is the case on most SL eBikes, the 400 Wh battery is not easily removed for charging off the bike. To get it out, the motor must be dropped out first, making it impractical to do anything but charge it in situ. The sensor for the Bosch SX motor is contained on the valve stem, and a wireless remote on the handlebar is used to switch modes.

Like the TQ-powered NEAT and the F-Podium XC bike, the Dune has moved to the Updated Zero Suspension design.

We'll go into the kinematics shortly, but it's first worth mentioning other implications of the layout. As the shock sits within a tunnel created by the two struts of the seat tube, insertion depth is somewhat limited, and so too are the options for longer travel dropper seat posts that most of us are, happily, now accustomed to. Stock dropper lengths on the top-end XR model are as follows: S (125mm), M (150mm), L & XL (170mm). The more affordable RR, and R models get the adjustable Onoff Pija dropper, with the following drop lengths: S (125mm), M (120-150mm), L (140-170mm), XL (170-200mm) - so, a slight improvement for the tallest riders.


photo
Cables go through the headset
photo
The rebound adjuster on the Ohlins coil is a little tricky to access on the Dune

Protection has been considered, with comprehensive chain slap coverage along the chainstay, and a thinner strip added to the underside of the seat stay, too. There's a micro fender bolted to the back of the seat tube, just above the shock tunnel, to protect the shock from some debris deposited by the rear tire.



photo
photo

Geometry

The Dune continues with Mondraker's Forward Geometry concept, their marketing term for the "longer, lower, and slacker" trend, of which they were very early adopters. There are four sizes ; S, M, L & XL, with reach numbers evenly distributed at 440mm, 460mm, 480mm and 500mm, respectively. Seat tube lengths are relatively short at 380mm, 420mm, 450mm, and 490mm, respectively. However, as already mentioned, the insertion depth is the limiter in terms of dropper seat post length.

The flagship XR model is the only one to run a 180mm travel fork and a coil shock. The R and RR models run an air shock and a 170mm fork. As such, the XR is the slackest with a 63.5° head angle and a 77.1° effective seat tube angle, while the R and RR models get a 64° HA and a 77.5° SA. The abovementioned reach figures also grow by 5mm each for the R and RR.

Chainstay length is consistent across all sizes at 445mm. For the XR, the BB sits 3mm higher than the rear axle at a height of 353mm. It's a zero drop for the R & RR, at a height of 350mm. The small and medium bikes are equipped with 165mm cranks, while the large and extra large bikes get 170s.



photo
The XR model is coil-equipped, while the more affordable RR and R models run air; Ohlins on the RR, and Fox on the R

Suspension

The Dune makes use of the Updated Zero Suspension Platform to deliver 165mm of rear wheel travel through a 205x65mm trunnion mounted shock. It's still a twin-link platform wherein two short links co-rotate as the rear wheel is displaced. However, instead of the shock being driven by that lower link, it's now driven by the swingarm itself.

Happily, there is nothing out of the ordinary about the Dune's kinematic. The average leverage ratio comes in at 2.53, starting just shy of 3.1, and finishing up just north of 2.3. While the vast majority of the curve is progressive, there is a small portion near bottom-out where the curve is slightly regressive.

photo
photo
Anti-rise
photo
Anti-squat for a 34t chainring and the 52t sprocket of the cassette

Mondraker have given the Dune higher anti-squat values than they would for a comparable non-motorized enduro bike. Around sag, anti-squat sits at 128% for the easiest gear. That's intentional, and arguably desirable given that there's a great deal more acceleration to be had out of an eMTB. Anti-rise is relatively high; it's around 95% at sag, and doesn't dip below 88% at any point throughout the travel.



Models

It's quite uncommon for an e-bike manufacturer to make a frameset available, but Mondraker is doing just that with the Dune eMTB. Meanwhile, they will also sell it as a complete bike with three models to choose from. The frameset will retail at $6,799 USD, and will be available in "limited quantities". While some will surely be enamored by the opportunity to build up a Dune with their own carefully selected components, the value proposition doesn't seem quite so appealing when you see that for only $1,200 USD more, you can get a complete bike in the form of the Dune R.

photo
Dune R: €7,999 / $7,999 / £6,799

The Dune R runs a custom tuned Fox Float X Performance shock and a 170mm Fox 38 Performance fork with the Grip damper. It gets SRAM DB8 brakes and the GX mechanical 12-speed drivetrain, and e*Thirteen Grappler e*spec wheels with 30mm aluminum rims.

photo
Dune RR: €9,499 / $9,299 / £8,499

The Dune RR also runs an air shock and a 170mm fork, giving it a slightly steeper set of geometry figures than those of the XR. This one offers Ohlins suspension components; the TTX Air shock and the RXF 38 fork with an updated damper. It rolls on e*Thirteen Grappler Race wheels. The drivetrain is upgraded to the electronic SRAM GX AXS Transmission, and the brakes are SRAM Code with the Bronze Stealth levers and 200mm rotors.

photo
Dune XR: €11,999 / $11,999 / £11,999

Emptying your savings account is the Dune XR, reviewed here. This one gets e*Thirteen's Grappler Carbon wheelset, and TRS Race Carbon cranks, SRAM Code Ultimate Stealth brakes, and the XO Eagle AXS Transmission group. The Ohlins RXF 38 fork fronts it, with the Ohlins



photo
Photos by Kike Abelleira

Ride Impressions

The Bosch SX motor is impressive. Despite having a modest 55 Nm torque and a sub 2kg weight, it actually has the capacity to deliver the same 600 W peak power of the meatier 85 Nm CX motor. However, you have to pedal faster to convince it to give you that. While the 2.9 kg CX motor will give you 600 W at a cadence of just 70 kg, the Bosch SX asks you to spin at 100 rpm before it will dish out the big watts. That lends itself to an intuitive ride experience for those coming onto the Dune from a regular motorless mountain bike. Learning the motor's behavior was relatively easy. As you would on a regular bike, you need to rapidly increase your cadence to get the power needed to drive up and over steep rocky features.

It's much louder on the trail than the TQ HPR-50 motor, a somewhat comparable 50 Nm motor, but is much more powerful and punchy for stomping up steep, technical sections. It also has the added benefit of the Extended Boost feature, wherein the motor continues to deliver power to the rear wheel up to 2 meters after its rider has stopped pedaling. There are four riding modes; Eco, Tour, eMTB and Turbo, all of which are tunable in terms of the level of assistance they provide, and their "dynamism", or how quickly they respond to pedaling inputs. Only the eMTB and Turbo modes deliver the Extended Boost.

photo

There's also a Walk mode that can be activated by holding the down button on the remote for several seconds, which is super helpful following a forced dismount on a steep climb. I found it to be of variable efficacy, dependent on what gear I was in and how loose the terrain was. At the very least, it is useful in helping you prevent the bike from rolling back down the hill.

On the descents, the Dune is far from indistinguishable from an unassisted enduro bike, but it's easily the most natural handling example I've ridden thus far. To contextualize that, it is also the very first SL I've had the opportunity to ride, so I'm not at all surprised to find that this sub-20 kg ebike handles better than the heavier full-powered counterparts.

photo

I rode the XR model in a size small, with a 440mm reach and a 35mm stem. The bar was also cut down to my preferred 740mm, with the stack slammed. The 343 lbs spring that comes stock on the small gave me 26% sag (Mondraker's recommendation is anywhere between 25% and 30%). A softer spring was not available. I ran the HSC, LSC, and rebound fully open.

The bike is pretty easy to get on with. The 63.5° head angle is as confidence-inspiring on steep ground as you might expect, and the 77.1° seat tube angle is sufficiently steep for comfort on prolonged fire road climbs. Certainly, I did not feel the need to push my saddle forward on the rails to make it any steeper.

The bike tips into corners quite naturally, not requiring too much more aggression to set up than a regular enduro bike. To call it nimble would be overly generous, but it isn't as sluggish as some of its numbers might suggest and it is sufficiently maneuverable to give its rider that sense of self-determination that I feel is the essence of a good time.

photo

On the second day of riding in Sintra, I did switch to the Ohlins TTX air shock of the RR model. That gave me the opportunity to run a more standard 30% sag. On the whole, I'd say the coil setup gave a plusher, more controlled feeling to the bike, while the air shock gave it a little more pop, making it easier to get a good boost off lips and drops. It was harsher deeper into its travel however, and required a few clicks of LSC and rebound damping to get it feeling safer and more predictable. The stock air shock comes with two volume spacers (equivalent to 12,000mm³ of a possible 20,000mm³). I found myself bottoming out frequently on one of the faster DH-like tracks of Sintra, and so an additional volume spacer would have been ideal.

On both the air and coil shocks, the rear wheel had a tendency to feel a little light and unsettled under hard braking on steeper terrain. It was nothing too dramatic, and could well have been attributable to the soft, damp soil conditions, but I did feel this sensation fairly consistently over the two days of riding.

The rattle from the Bosch SX motor is easily audible. For me, that's not really a deal breaker, though some will of course find it a nuisance. Once I had determined the motor to be the source of the rattle, I was able to put it out of my mind. The only other noise was the whir of the three double-stepped pawls inside the e*Thirteen e*spec hub.

photo
The 125mm dropper post posed a bit of a challenge on steeper terrain

What is a deal breaker is the 125mm dropper seat post. While other aspects of the fit were very good, this lack of clearance is woeful. While it may be appropriate for an XC bike, or a short travel trail bike, it has no place on a 165mm travel enduro eMTB. Sadly, the clearance issue had the saddle slapping me on the backs of my thighs on even the mellower descents. I did drop the post to its deepest point to get around 15mm extra clearance, taking the hit of the then lower seated pedaling position.

I measured the maximum insertion depth at 186mm. The only saving grace here is that, in the context of my saddle height (632mm), it is possible to run a 150mm dropper from OneUp components.

Mondraker tell us the maximum insertion depth for the other frame sizes is as follows:

• Size M: 216 mm
• Size L: 248 mm
• Size XL: 282 mm

photo




Author Info:
jessiemaymorgan avatar

Member since Oct 26, 2023
71 articles

108 Comments
  • 70 1
 Is the bike fast enough to outrun sand worms?
  • 10 0
 As it was written!
  • 5 0
 Lisan al gaib!
  • 38 1
 This is the right direction, light but a decent amount of travel.
  • 3 6
 nah, the rattle kills it
  • 6 14
flag chrismac70 FL (Apr 9, 2024 at 5:28) (Below Threshold)
 Its not light. It weighs 20kg+ for goodness sake
  • 13 2
 @chrismac70: It's light in the context of full power emtbs weighing 50 lbs.+ and analog enduro bikes commonly exceeding 35 pounds. Modern bikes are awesome, but we are a long ways from when it was common to be riding a 23 pound bike.
  • 8 4
 @codypup: yeah they don’t break something in every ride anymore lol
  • 3 6
 @codypup: Speak for yourself. My 160mm enduro bike is 33lbs with DD tyres and cushcore. My trail bike is 27lb
  • 19 4
 Why do lightweight, long travel ebikes never stock a mezzer? 180mm travel 37mm stanchions and lighter than a lyric. Automatically 500grams + lighter than the competition with 38s
  • 9 22
flag Jordmackay (Apr 9, 2024 at 5:57) (Below Threshold)
 Because they suck
  • 2 0
 @Jordmackay: i feel a six bolt centrelock moment in the air
  • 8 1
 Honest comparison having just replaced a Mezzer with a Fox 38, the Mezzer is no where near as stiff.

Add to that the CSU creak that developed on my Mezzer and I’m not sure they’re up for heavier riders/ebikes.
  • 3 1
 @Jordmackay: You obviously haven't ridden one that was setup properly.
  • 8 18
flag Jordmackay (Apr 9, 2024 at 7:06) (Below Threshold)
 @mbm0103: I've never ridden one. Yet they still suck, crazy world we live in
  • 3 0
 @Murphius: but when your speccing lighter tyres/cassettes/shorter droppers, Compromising performance for weight left right and centre, the mezzer in reality still runs great, is stiffer than a 36 and would give a comeptitive marketing edge over other SLs weight wise
  • 1 0
 @qualms23 longtime rider, never heard the term mezzer? do tell-
  • 1 0
 @yakimonti: Manitou Mezzer
  • 12 1
 The seatpost insertion is really bad.

Just been through a whole "my bike is too short" drama due to feeling cramped and too forward, I was using a 180mm dropper at 5ft10, took the dropper out, put in a bmx seat slammed, bike felt the right size again, so much better placed on on the bike, ie lower with space to move. Moved onto a bike I can run a 240mm dropper.

Remember that question, rigid bike with dropper or suspension with full height seat, I'll 100% "compromise" on suspension layout for more seatpost insertion.
  • 1 0
 @FBM_BMX This is interesting. I'm curious, what bike did you end up with, and what other bikes did you consider with the longest insertion lengths?
  • 1 0
 Was giving this bike a real look but with 216mm insertion for a Med; I couldn't even run my AXS. Even their smaller Crafty model has 248mm for the same size.
  • 12 1
 Thank god for headset routing - it has saved me a lot of money.... Not buying it.
  • 9 1
 Based on the review it seems this Bosch SX motor will benefit from shorter cranks like 145mm to get the assistance quicker. PINND has that sorted out.

The seat tube length is a killer. 420mm for a medium seat tube is long 400mm about right. But a max insertion of 216mm is really bad. The insertion lengths of the Oneup are as follow: 150mm (237mm), 180mm (267mm), 210mm (297mm). As you can see you can't even slam a 150mm dropper and that's unacceptable. A medium frame should be designed to slam a 210mm. Shorter leg riders benefit from more clearance.
  • 10 1
 Never got why manufacturers do the headset routing thing, but don't bother routing the front brake through the steerer tube, surely that's the best looking option ????
  • 3 0
 At least road bikes do their pointless cable hiding properly, using ugly oversized stems to conceal the cables. This just looks weird with one visible cable.
  • 1 0
 Amen brother.
  • 2 3
 the reason sram brakes are now positioned the way they are is the next move is to put the master cylinder in handlebars. Probably 2 years out at most.
  • 3 1
 @stunnanumma1: Magura prototyped this a few years ago. With the bleed port in the bar end

magura.com/en/EUR/technology_innovation/bicycle/magura_cockpit_integration

The challenge is making the lever placement adjustable
  • 1 0
 @chrismac70: Perfectly straight bar, which you could rotate based on your brake angle preference. Would suck though I like most love my riser bars, and would mean I'd need 4 inches of spacers lol
  • 1 0
 not possible, there must be some freeplay for the brake hose
  • 8 2
 Moderators, I have a question: Are manufactures aware of the customers' detest for headset routing, and what benefits do they claim such routing has we are unaware of?

Hope I get answers.
  • 3 1
 They probably weren't 2 years ago when the frames were designed. It'll disappear like press in BBs. Whats gonna become more common is no cable routing like the new yeti arc. I'm amazed it took this long for a company to get rid of cable routing altogether(I know there's 1 cable for the rear brake)
  • 3 1
 The benefits for them are cheaper frame manufacture costs. It seems most of the brands pushing this shit are too stupid to realise it's costing them more in sales than they're saving.
"Benefits" for us are a supposed cleaner look. Personally I couldn't care less about that.
  • 1 1
 @commental: more aero
  • 2 0
 @kingbike2: That's hilarious.
  • 7 0
 Bike looks really nice but... Headset routing Shit Dropper insertion Too expensive
  • 3 0
 Good summary.
  • 4 1
 I'm having some trouble with 1625 (5300 ft) meters of elevation gain. I have a bit of experience here as I own two emtb's. One is a full sized Heckler with a Shimano motor and 720 watt battery. The other a Heckler SL with a Fazua motor and 430 watt battery. Unless Bosch has somehow changed the laws of physics, I believe it to be impossible for her to have ascended 5300 feet on a 400 watt battery with the settings she used. I'm thinking she meant 625 meters, but would be interested to know for sure.
  • 1 0
 I manage 1500m on Bosch 750Wh in full power (which would equate to 800m with 400Wh), and I get 800m with Shimano 500Wh. Sure this is a lower power mode, but that seems really efficient.
  • 2 1
 I’ve 2 low power ebikes, a Trek Fuel Exe and Specialized Levo SL. In Eco mode set to 50% assist, I wouldnt get anywhere near 5300’ of climbing. In middle and full power mode as, as she tested, it would be seem to be impossible. On my Levo SL I did a bike trip where I rode in Eco until the very end of the ride which was a short steep climb back to the car. I only had 9% battery left after 2500’ of climbing.
  • 2 0
 Total system weight has a big bearing on elevation range with ebikes, as does fitness. That said the 1625m when not in eco does sound a bit much, even for a light rider.
  • 2 0
 @mark90: I'm 60kg for reference
  • 3 0
 @rojo-1: similar weight to the tester then. Like I agreed 1625m does seem optimistic. Knowing how significantly the difference in weight from say 50kg to 100kg makes range expectations should be adjusted accordingly. It would also be helpful for the tester to list their weight as well as the range achieved and power modes.
  • 3 0
 19,92 kg in size S, that's not a light ebike, in any other size or cheap setup it will go over 21 kg. The Forestal Siryon weighs 17.2 kg in size L with long travel. That's light, this Mondraker is pure marketing nonsense, a want and can't do.
  • 6 3
 490mm seat tube on a bike a bike with 500mm reach?
Wtf? 2012 called, they want their 125mm droppers back.

For once, there is an even bigger deal breaker than the headset routing.

Massive fail
  • 3 1
 Mullet bikes should never come with 170 cranks no matter the size.

And WHY is the insertion depth so shit? Makes this bike unbuyable
  • 1 0
 Because of the stupid shock tunnel design. Maybe it looks cool or there is some bs about lowering the center of gravity, but I won't buy another frame with it after dealing with it a few times. Can make some shock adjustments borderline impossible without removing it, setting sag can be difficult to see, and as you mentioned, it often will compromise insertion depth.
  • 1 0
 If I wanted to buy a Bosch powered, Mullet, Non-headset cable routed bike thats a full fat ebike but a bit lighter than this - what are the options? I'm only really aware of the commencal meta.
  • 4 0
 I would go with Canyon StriveON and just brave out the cable tourism. Best bike on the market.
  • 9 8
 I want a bike like this but it has to have swappable batteries! Ebikes are pointless with only one battery. I use both batteries on my full fat ebike most rides.
  • 7 3
 Kind of defeats the "lightweight" part if you add the weight of a battery door, connector and another 2.5kg battery in your back-pack! I manage full days on 320Wh by pedaling more, and pedaling more is made less gruesome because its probably 7kgs+ lighter than your FF with a spare battery.
  • 5 0
 Transition Relay is pretty much the only option
  • 1 0
 @G-Sport: for my big rides I park my car in the middle so I swap batteries mid ride, so no extra weight carrying it. The whole point of an ebike is being able to self shuttle enduro spots or dh tracks, so it's easy to get back to a car for a battery and do a 10,000ft+ ride.
  • 2 0
 @Dallasdownunder: we need more options!
  • 1 0
 @solamanda: sounds lovely. But for me, the "whole point" of any bike is to have fun, so I want the bike to be as fun as possible and a genuinely lightweight ebike seems to give me maximum fun as I can still bunnyhop and do tech stuff as needed but spend less time on the dull climbs.
  • 3 2
 How is 480 mm for a large bike "longer"? Also, it's not slacker or lower then majority of the bikes out there. So, what remains of that 'forward geometry'?
  • 3 0
 Should be called the OG FWD GEO.
  • 5 1
 Just means every other brand has now caught up . Only took 12 years
  • 1 0
 this fraze is took from 5 or more years old articles. currently - only a memory that Mondraker was one of the first mass producers who implemented progressive geometry. My Nicolai G1 M has 495mm reach
  • 1 0
 Mondraker may be living on past glories a bit with the "forward geometry" thing, but their sizing is pretty decent and on-trend still.
Becuase they were so early on it, they have more right than most brands to boast about their geometry IMO, even if their head angles tend to be too steep for my taste now.
  • 1 0
 @chakaping: It's not pretty decent. I like longer bikes and 480 is on a shorter side for me. However, their xl with 490 long seat tube would allow me only a 170 mm dropper. If I'm lucky.
  • 6 4
 eBikes taking baby steps to full moto status - the motor carries on powering the wheel after you've stopped pedaling.
  • 1 0
 Yeah what’s that about!?
  • 1 0
 This bosch motor has auto pedaling? how did I miss that in the PR?
  • 1 1
 Yep, it has been around since Bosh introduced their "pro" engine last year. People are riding motorcycles, deluding themselves that they are still bicycling.
  • 2 0
 'How you Dune?', as Joey would say.
  • 3 1
 Headset cable routing. This is the work of the Harkonnens, indeed.
  • 2 0
 photos @ Sintra - Portugal?
  • 3 0
 Correct! Beautiful place Smile
  • 2 0
 "Burros" trail and "home" on the last photo
  • 1 0
 @jessiemaymorgan: thx, yes it is!!! a shame the pictures didn´t capture the sea landscape!
  • 2 0
 @luis-beri: I found a photo to address that oversight.
  • 1 0
 @jessiemaymorgan: great! cheers!!
  • 2 3
 What a joke: a 45 pounds motored-bicycle is now "light enough". These are monsters that would barely move without an engine: people are riding motorcycles, deluding themselves that are still bicycling.
  • 2 1
 Yes, but they're so much fun
  • 2 0
 I just don't get those "motorcycle" remarks. I have been riding lightweight 4X, trail and enduro bikes for 2 decades. My current bike is a Transition Spur. For the last 10 years I have been riding 300cc 2-stroke hard enduro motorcycles, lightweight rally bikes and trials motorcycles. I have also tested a 25kg full-size enduro e-MTB. Saying that an e-MTB is closer to a motorcycle than to a regular MTB is total nonsense. Even a lightweight sub-70kg trials motorcycle feels very different to an e-MTB. A 110kg enduro motorcycle is a completely different world.

Would I want a 25kg e-MTB for flat trails?... no. Just because I would prefer something more playful. The same way I wouldn't ride a 170mm enduro MTB on those trails. But if you are doing long alpine descents, a full-size e-MTB is perfect in my opinion and on steep descents it feels fairly nimble and not that different to a regular MTB. I'm 195cm and 90kg so it might be easier for me to manoeuvre a heavy bike than it would be for a shorter/lighter rider.

My next bike will probably be a full-size e-MTB. My local riding includes alpine trails at an altitude between 1000m and 2000m. Often times the ride starts with a road climb covering up to 900 vertical meters followed by a 20min DH ride on some steep, rocky trails. On my Transition Spur the climb takes me 1h 30min, on an e-MTB I can do the same climb in 40min and the battery has enough capacity for me to do 2 loops. Still takes some good effort to get up and gives me twice the DH time.
  • 1 0
 @tomsgr: what there is to get about my comment? If you ride an e-bike you are riding a motor-cycle. You are no longer a cyclist. You might as well buy a motor-crosser or a trial motor-cycle to go through the Alps. sure they are fun, but you are not bicycling and should have no place in what used to be a bicycling magazine.
  • 1 0
 @dododuzzi: oh stop yelling at the clouds. They're here they're not motorcycles. Why are you here? You will continue to get passed by them and see the content.
  • 1 1
 @psullivan65: I am regularly passed by cars and motorcycles. It is because I am bicycling. And sure, if it so important to you to be "first" no matter what you use, go ahead and put an engine on your bicycle. But it is really not too much to ask to have polluting motored-cycles to get off a bicycle site!
  • 1 1
 @dododuzzi: this free site will continue to provide great emtb content, brought to you by the cycling industry. Neither of them cares about entitled gatekeepers. Might as well get used to it.
  • 1 1
 @psullivan65: This freesite should split in two: Pinkbike and a PinkEbike. Leave the motorcyclists with their own site.
  • 1 1
 This is like the perfect ebike. power and battery combine. Thank you Mondraker for not following the trend.
  • 2 1
 Under $12k US means we have a deal, said no-one ever.
  • 1 0
 Great write up. Thanks for talking about the range.
  • 1 0
 seems very similar yo the transition relay
  • 1 0
 Except I can almost slam a 210mm dropper in my medium relay.
  • 2 0
 @kylar: my relay has a 210mm and its slammed (large)
  • 1 0
 @p1nkbike: Yeah! It sounds like that is not possible on this bike, which is a big negative to me.
  • 1 0
 Can the Dune make me go as fast as Dunne?
  • 1 0
 Can reviwers be qualified please
  • 1 0
 That insertion depth should be criminal.
  • 1 1
 With the advent of the e-mtb, the future mountain biker will have a BMI of 42 and an empty bank account. Oy vey.
  • 1 0
 "for only $1200 more"
  • 1 3
 I don't want to say anything about cable tourism, but I'm ready to curse the bike manufacturers.
  • 2 3
 The cover photo with the lowered seat looks like crap
  • 2 2
 $12K? Wow, just wow.
Below threshold threads are hidden







Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv56 0.054066
Mobile Version of Website