Randoms: A Plethora of Grips, Multicoloured Lock Nuts, Anodized Rotors, & More - Sea Otter 2018

Apr 19, 2018
by Sarah Moore  
The Danny MacAskill edition of the Lizard Skins Single Compound Grip.

The Danny MacAskill Single Clamp Lock-On grips.
The Danny MacAskill Single Clamp Lock-On grips.
Lizard Skins has two different Danny McAskill grips each available in three different colours. The Single Compound Grip and the Single Clamp Lock-On Grip.
Lizard Skins has two different Danny McAskill grips, each available in three different colours.

Orange Seal now offers six colors for the lock nuts on their VersaValve tubeless conversion kits - Orange Black Red Blue Pink and Green.
Match your lock nuts to your bike. Orange Seal now offers six colors for the lock nuts on their VersaValve tubeless conversion kits - Orange, Black, Red, Blue, Pink, and Green.

Fouriers is a high-end bike component manufacturer based in Taiwan. This hardtail mountain bike is the first bike that they ll be selling the USA.
Fouriers is a high-end bike component manufacturer based in Taiwan. This hardtail mountain bike is the first bike that they'll be selling the USA.

Fouriers stem and bar on this Summic mountain bike.
Fouriers stem and bar on this Summic mountain bike.
Blue to red US of A paint job and an integrated dust catcher.
Blue to red US of A paint job, and an integrated dust catcher.

Fouriers is a high-end bike component manufacturer based in Taiwan. This hardtail mountain bike is the first bike that they ll be selling the USA.
Integrated Di2 cable system.
Fouriers is a high-end bike component manufacturer based in Taiwan. This hardtail mountain bike is the first bike that they ll be selling the USA.
This hardtail mountain bike is the first bike that they'll be selling the USA.

Anodized titanium rotors from Fouriers.
Ti-anodized rotors from Fouriers.

G-Form has brand new Pro Trail gloves that use the same Reactive Protective Technology as their pads do on the knuckles. Give the poster at their booth a first pump use hashtag protrailglove and you could win a pair
G-Form has brand new Pro Trail gloves that use the same Reactive Protective Technology as their pads do on the knuckles. Give the poster at their booth a first pump, use hashtag #protrailglove, and you could win a pair!

The anatomical characteristics of the female pelvis were analysed in the course of long-term studies and the results led Ergon to completely redesign their women s saddles.
Ergon analyzed the anatomical characteristics of the female pelvis in the course of long-term studies. The results led Ergon to completely redesign their women's saddles.

Santa Cruz Danny Mac custom trials bike. Sea Otter 2018.
Danny MacAskill's custom Santa Cruz trials bike.

Santa Cruz Danny Mac custom trials bike. Sea Otter 2018.
Santa Cruz Danny Mac custom trials bike. Sea Otter 2018.

Santa Cruz Danny Mac custom trials bike. Sea Otter 2018.
Designed and manufactured in California.

This Subaru Brat steals the show. Sea Otter 2018.
This Subaru Brat steals the show.

ODI foam grips. Sea Otter 2018.
ODI foam grips

ODI foam grips. Sea Otter 2018.
ODI foam grips

Sensus. So good. Sea Otter 2018.
Made in California Sensus Lite grips

Sensus. Sea Otter 2018.
Sensus. So good. Sea Otter 2018.

Syncros new integrated bars. Sea Otter 2018.
Syncros' range of Hixon integrated bars covers everything from XC to Enduro, up to 800mm wide.


MENTIONS: @SeaOtterClassic




67 Comments

  • + 164
 "Ergon analyzed the anatomical characteristics of the female pelvis in the course of long-term studies."

I didn't know your mom was collaborating with Ergon
  • + 51
 Is that why they look so much wider now?
  • - 2
 Analized female pelvis and the result is a hole
  • + 52
 Fuck sea otter we want claudio caluoris run!!!
  • + 7
 He got injured don't know if there is a complete run.
  • - 4
flag mollow (Apr 19, 2018 at 14:48) (Below Threshold)
 Show some respect... Claudio broke himself and you're whining about waiting a few more hours? What's wrong with you?
  • + 3
 @mollow: For us folks in Europe nighttime has arrived and we can't wait another night. If you watch ben cathro's vid you willl see that he made it down evetually
  • + 15
 @mollow: no one here needs your moral high ground.
  • - 21
flag jclnv (Apr 19, 2018 at 16:16) (Below Threshold)
 Yeah fuck you Claudio.
  • + 0
 Agreed
  • + 6
 Why are you people so nasty? Claudio is a f#cking legend. Pre rides all the courses while commentating and entertaining all of us, does a tremendous amount for the sport we all love, including building pump tracks all over the world. That brings more people into riding and improves their lives and some of you don’t give a sh$t that he just took a 3.5 meter fall onto his head???!! There’s something deeply wrong with that.
  • + 5
 @fattyheadshok: I was being sarcastic. I agree, guy Injures himself and all people can say is "what about my f*cking entertainment".
  • + 2
 @fattyheadshok: @jclnv: Again, in Ben Cathro's video he is seen continuing down but he was obviously stunned. He was mumbling and talking about how he had to find his words again. His audio probably also went to sh*t with the crash because he lost a mic muffler
  • + 7
 @fattyheadshok: I had no idea he was injured until reading these comments, and its possible or even likely the first poster didn't either
  • + 3
 @mollow: Ctrl-C, Ctrl-V
  • + 37
 Not the wurst Brat I've ever seen.
  • + 4
 Go sit in the car dad.
  • + 36
 That Bratt!
  • + 3
 A lovely one
  • + 1
 Made by Jay Nelson.. a master wooden dwelling creator..
  • + 3
 there may not be anything more California than that.
  • + 10
 Dude I think I saw those rotors on a bike I was staring at when I was at Burning Man ????
  • + 7
 Was hoping the bottom would say "That's it for our Sea Otter coverage! Now enjoy all our World Cup coverage clutter free!"

#dreams
  • + 4
 C'mon now, Sea Otter coverage ain't that bad
  • + 2
 Sea Otter is the new interbike
  • + 7
 Poor sap has to cover Seat Otter instead of heading to Croatia.
  • + 3
 i was thinking the same thing
  • + 2
 I really liked Croatia but I’ll take Monterey even if they do have DH there right now.
  • + 3
 65-70 degrees and sunny this weekend, yeah Sea Otter sucks..
  • + 7
 That fouriers bike is unbelievably ugly.
  • + 1
 I thought it was a Niner Air 9 at first glance
  • + 2
 Looks like a nineties bike frame.
  • + 7
 More Brat PLS
  • + 3
 Built by @jay on instagram. Probably one of the coolest builders out there. You can see more of it there (as well as lots of other places on the net if you search him and brat.
  • + 2
 Shoehorn some 31" mudders under it!!
  • + 6
 Sorry that brat stole my heart....
  • + 1
 I have a lot of issues with Ergon gloves... Grips are ok, but the gloves hadn't the elastic upon the hand, making L sized gloves perfect in the palm, but loooong fingers... So i test a M glove and perfect fingers, but are strangling my hand.
  • + 3
 More info on that syncros bar! Suddenly want one for random klunkerz buildz
  • + 1
 the new Surly Sunrise bar sounds more klunker appropriate. Basically an old school steel moto bar or a low rise wide bmx bar depending on how you look at it
  • + 1
 @StLewis: How do you make an active link in comments?
  • + 2
 @hbar314: crtl c + ctrl v... idk? just ended up that way
  • + 1
 "This Subaru Brat steals the show" ~ only because it can't get out of its own way under that ponderous Jethro canopy job.

Get a Westfalia and call it good & use that brat for what God intended ... target practice.
  • + 2
 i saw the headline and thought "whats the point in anodized rotors, who cares what they look like?" .. and then i saw them

wow
  • + 4
 Those rotors... I wonder if there's any chance of heat discolouration?
  • + 3
 Chainless trials bike is the wave of the future.
  • + 3
 Stamped rear cog on MacAskill's bike?!?
  • + 0
 I thought that was pretty cheesy too.
  • + 0
 $3 cog on a one of a kind bike lol.
  • + 2
 Should be narrow wide and bio pace
  • + 4
 Senus is the sansei!
  • + 3
 damn im getting that anodized rotors
  • + 0
 Are they actually aluminum rotors? If not it probably isn't anodizing.
  • + 1
 @jcav5: true...but ever tried ti rotors?? They are horrible!! Big Grin
  • + 2
 currently using the ODI Vapor grips and they rock . No numb hands !!!
  • + 1
 Lizard Skins has two different Danny MacAskill grips, Pinkbike has two different ways of spelling MacAskill
  • + 1
 to bad those Rotors are made from stainless steel with ti-COATING. and they arent aviable set, sadly.
  • + 2
 Those “titanium” rotors are actually steel.
  • + 2
 OURIs !
  • + 1
 Would you say I have a plethora of piñatas?
  • + 1
 NO, NO,NO, Syncros bars, are just wrong!!!.
  • + 2
 Sensus FTW
  • + 1
 I need double clamps or I don't dare to ride.
  • + 1
 OH MY GOD take my money - the Ti Ano-rotors are you so sincerrious?!
  • + 1
 Wow didn't think Danny would go chainless
  • + 0
 No e thirteen drivetrain yet?

Post a Comment



Copyright © 2000 - 2019. Pinkbike.com. All rights reserved.
dv56 0.033999
Mobile Version of Website