The Rise Introduce the Partymaster V2 Frame

Sep 16, 2021
by The Rise  
The Rise Partymaster V2 https the-rise.com pages partymaster-v2

Press Release: The Rise


Introducing the brand new upgraded The Rise Partymaster V2; the ultimate Freestyle MTB frame on the market. One frame that can do it all; from riding curbs in front of your house to flipping over 50 ft. jumps. The frame did change, but our philosophy didn't. To us, biking was never about the skills and the contest results; it was about all the life experiences that come with it. The goal is simple: get people stoked on riding bikes!

When designing the Partymaster V2 frame, we reached out to our team to see what kind of improvements should be made, if any at all. Everyone quickly agreed that the geometry should not be changed one bit, and the only thing we should focus on is making it even stronger. For the Partymaster V2, we upgraded the 32mm Top Tube to a double-butted tube that tapers to 36mm at the headtube junction, while the Down Tube got upgraded to a 36mm double-butted tube. This increase in diameter provides larger welding areas, which combined with the Down Tube gusset and the newly added Top Tube gusset, increases the overall strength and stiffness of the front end.

The Rise Partymaster V2 https the-rise.com pages partymaster-v2
The Rise Partymaster V2 https the-rise.com pages partymaster-v2

One of the main changes from the previous version is that we had to change to a new frame manufacturer. The reason behind that change is that we had too much demand and our previous manufacturer couldn't keep up. Finding a new manufacturer that could handle our demand was a stressful process because we did not know where to start, and there was no way we would compromise on quality.

That is when we met BMX mogul Ronnie Bonner who guided us to a manufacturer producing very high-end bikes based in Taiwan and after a year of prototype testing, we are very excited to finally present the new Partymaster V2.

The Rise Partymaster V2 https the-rise.com pages partymaster-v2

Geometry

*Based on 470mm A2C Fork
Head angle: 70.2°
Seat tube angle: 70.7°
BB drop: -5.1mm
Chainstays length: 377.5mm/14.8”
Top Tube C to C: 577mm/22.7”
Reach: 422.2mm/16.6”
Stack: 531.9mm/20.9”
Wheelbase: 1035.4mm/44.7”
Headtube length: 105mm/4.1”
Seat tube length: 305mm/12”
BB height: 345.1mm/13.6”
Standover (mid-tt): 739.2mm/29.1”

The Partymaster V2 is now available for Pre-Orders. The Rise is a rider founded, owned and operated bicycle company based in Montreal, Canada. Follow The Rise to stay up to date with their activities!


6 Comments

  • 5 0
 What a beautiful frame!
Here’s to hard tails and clean welds.
#mtbikingsince89
  • 3 0
 It's a shame this is no longer made in Canada. Looks lovely though
  • 3 0
 It's a shame the Canadian manufacturer couldn't keep up with demand.
  • 1 0
 @onemanarmy: Couldn't they keep both manufacturers?...
  • 1 0
 @rosemarywheel: Sure. Some companies do that.

But what they do is have a "Canadian" version and a "Taiwanese" version. Good example of that is Chromag. They don't necessarily have two versions of the same frame but they do have a TWN line and a CA line.

If you'll notice... the CA frames are double the price of the TWN frames.

It's just not worth it for most companies to do that.
  • 1 0
 @onemanarmy: Cheers, that makes sense. I do want that purple Monk frame...

Post a Comment



Copyright © 2000 - 2021. Pinkbike.com. All rights reserved.
dv42 0.010881
Mobile Version of Website