MUST WATCH: Wade Simmons Crushes Old School Cool in 'Pipedream' - Video

Dec 8, 2017
by Rocky Mountain Bicycles  
Views: 47,717    Faves: 498    Comments: 21


Wade Simmons has been in the freeride game since the beginning. He's left his mark on our sport through an extensive catalogue of images and video segments, showcasing his creative ability to conquer any line with unmistakable style. Simply put, Wade’s career has been driven by his desire to do something different. While watching the old footage of himself riding in The Moment, he couldn’t help but get nostalgic on the bikes that helped make his career.

Bikes like the Pipeline, Switch, RMX, RM7, and RM9 were the tools of Wade’s trade. To him, these were the bikes that had soul. The “Thrust Link”, “NE 3”, and “3D Link” were some of the iconic technologies that helped make these bikes special. This was at a time where adding linkage plates to everything was the obvious solution.

Wade is what we call an “ideas man.” Fueled by Wade’s creativity, Rocky Mountain Bicycles decided to build a very special bike, founded on nostalgia and designed to modern day standards. Tapping into some of his old favourite lines, this is a story of Wade Simmons’ Pipedream.

Wade Simmons Pipedream

Wade Simmons Pipedream
Wade Simmons Pipedream

Wade Simmons Pipedream
Wade Simmons Pipedream

Wade Simmons Pipedream

Wade Simmons Pipedream
Wade Simmons Pipedream

Gussets and linkage plates were an iconic look of the early 2000's. Riders like Wade were beginning to push mountain biking in a new direction, and the frame designs were changing to meet their demands. From 49mm straight head tubes to adding extra gussets for flair, the Pipedream embodies the renegade spirit of freeride.

Wade Simmons Pipedream
Wade Simmons Pipedream

Many of the early Rocky Mountain freeride bikes had a feature that allowed you to mount the rear shock in 3 different locations. This was known as "NE 3", and required 2 linkage plates on either side of the shock with a cross-brace to stiffen everything torsionally. While having a bit of fun with cross-bracing designs, the NE 3 Man was born.

Wade Simmons Pipedream

The 3D Link was a CNC'd feature on our full suspension bikes of the late 90's and early 2000's. Platforms like the Element, Edge, and Slayer all had versions of the 3D Link, which made it a natural addition to Wade's Pipedream.

Wade Simmons Pipedream

Wade Simmons Pipedream

Wade Simmons Pipedream

Wade Simmons Pipedream

The Rocky Mountain Bicycles Development Centre is located at the foot of Vancouver's North Shore mountains and is home base for all of our product development. It's here that we weld our prototype frames, test new ideas, and fine tune the details. Longtime Rocky Mountain Bicycles welder, Al Kowalchuk worked on this custom project, delivering an incredible finished product.

Wade Simmons Pipedream

Wade Simmons Pipedream
Wade Simmons Pipedream

Wade Simmons Pipedream

Wade Simmons Pipedream
Wade Simmons Pipedream

Wade Simmons Pipedream

Wade Simmons Pipedream
Wade Simmons Pipedream

Wade Simmons Pipedream

Wade Simmons Pipedream

Wade Simmons Pipedream
Wade Simmons Pipedream

Wade Simmons Pipedream

Wade Simmons Pipedream
Wade Simmons Pipedream

Wade Simmons Pipedream
The Godfather of Freeride, Wade Simmons.

Rocky Mountain is proud to have been involved with the feature film, The Moment. We would also like to say a huge Thank You to Wade Simmons for his continued inspiration and dedication to freeride mountain biking.

Presented by Rocky Mountain Bicycles
Featuring Wade Simmons' Pipedream

PIPEDREAM
Frame Development & Design by Tom Ferenc, Lyle Vallie, Joe Kerekes, and James Mallion
Welding by Al Kowalchuk
Frame Preparation by Billy Chang
Paint by Harald Strasser at Toxik Design Laboratory


MUSIC
Magic Unfolding by Big Score Audio &
Voytek by The Heavy Eyes
All rights reserved. Used with permission.

FILM
A Film by Scott Secco
Featuring Wade Simmons
Produced by Stephen Matthews
Guest Appearances by Darcy Turenne and Rocky Mountain Bicycles staff
Sound Design by Keith White Audio
Typography by Mike Taylor

Archived footage by Todd Fiander, Christian Begin, Bjorn Enga, Darcy Wittenburg, and Jorli Ricker
Photography by Margus Riga

Special Thanks to Fox Suspension, Race Face, and Shimano




MENTIONS: @RockyMountainBicycles / @scottsecco



Must Read This Week

239 Comments

  • + 318
 My vote for project of the year! So much nostalgia for those of us who drooled over old Kranked videos & dreamt of owning a pipeline or RM series!
  • + 47
 I can't even begin to explain how disappointed I was when the new pipeline came out and had nothing in common with the old school version... This replaces a great deal of that lost love, great job Rocky Mountain!
  • + 116
 I have only one thing to say, that vid was too short man!
  • - 34
flag chyu (Dec 8, 2017 at 0:43) (Below Threshold)
 How is he going to get a drink if the bike doesn't have a bottle cage? Vending machine?
  • + 39
 @chyu: Pub!
  • + 43
 RM - ditch the plastic and make more METAL!!! That's one great looking bike.
  • + 10
 It should be called the Bolton. Just look at the flayed man on that forward shock mount.
  • + 32
 Product/rider/bike/comeback of the year award
  • + 7
 This is really the MUST WATCH one. Can't help to watch it 3 times. The bike is gorgeous!
  • + 2
 @chyu: who uses water bottles now, xc racers maybe?
  • + 3
 @ns06yv: I used my camelbak on a ride last night after using bottles for the last year. Damn was it good and easy.
  • + 0
 That bike has to have the nastiest back end - she's gotta be tamed just to ride her!!!! Damn pipedreams never end!
  • + 8
 its just missing "rocket man" by me first and the gimme gimmes
  • + 1
 @fartymarty: They'll do both and reap the rewards of both worlds! It's 2017 man!
  • + 2
 some of us owned them
  • + 1
 I loved mine (until it broke lol!) Still this made me miss it. Thanks RMB and Wade...

#frorideforever
  • + 1
 Im building an old school purple pipeline right now. Cant wait. Sexiest mtb of all time.
  • + 121
 Yeah Wade! Love the paint job, NE3 man and fro sticker! Keep shredding bro!!
  • + 30
 Tippie we love you just as much man, I think it may be your turn in the near future to make a modern version of your favorite rig (I understand shift in sponsorship) but damn that would be wicked.
  • + 3
 @BoneDog: f*ckin A the man deserves it! Sponsorships aside! I'd love to see it... It'll happen!
  • + 8
 I remember being an 18 year old hucker on a Nicolai built mongoose amplifier 2 DH with judy DHs back in 97. we were doing stupid things in the woods in Bromont and didnt care about racing. Then the Freeriders (soon to be Froriders) were everywhere in magazines. Finally somebody understood real mountain biking! Thanks Tippie and Wade for showing the world that mountain biking was not about racing! I still own my pipeline, rm7 and switch.
  • + 1
 @RoverDover: Preach! #frorideforlife
  • + 1
 @BoneDog: Totally washed, my ass...
  • + 39
 he was Wade ahead of his time
  • + 4
 slow clap
  • + 30
 I don't know if nostalgia, but it feels like back in the day bike brands had more personality. Like those gussets by Rocky or Cannondale's welding and GT triple triangle. Today it's all carbon, smooth it out, and lots of similar looking bikes. BTW, sick video!!
  • + 2
 This happens in many products as they develop, people trying things out, different ideas, "personality", (note that this personality you talk of is mostly an attribute of the frame, not of the bike) as it becomes more clear what works best in which situation, superior ideas or sellable ideas (which are just ideas that are superior, allbeit at selling) take over, and variations on tried, tested, accepted, and indemand products become relatively less obvious.

Never understood this obsession with "distinct" or "personality" or "backstory" that stuff is mostly bullshit anyway, even if theres truth in it at the core somewhere.

But you might be in for a treat if linkage forks get taken up like they should be for their superior performance (but won't be for many many years) that would result in a great deal of personality again... then again they're not that likely to be taken up partly because they have too much personality and only a tiny minority actually have any interest in personality, most are just nostalgic for throwbacks.
  • + 32
 Who needs carbon when you can have gussets and linkage plates?
  • + 13
 Linkage plates and Metal!!!
  • + 12
 This is a nice bookend to yesterday's "Gussets are an admission of failure" hooey from the Yeti article.
  • + 2
 Wade: One word, LINKAGE PLATES.
  • + 22
 and now i feel stupid, just read the fine print and it says bike is not available for purchase... my hopes and dreams are crushed, u guys should have saved that for april fools not ruin a mans dreams right before xmas Frown . wade any chance you wanna sell me yours?
  • + 7
 I had my credit card out and everything... I would buy this bike in a second!
  • + 1
 @NWuntilirest: @NWuntilirest: That's a complimentary promo page to make this faux "bike launch" seem fully legit. You can't buy this bike at all.
  • + 2
 @frojoe: dammit. gonna cry myself to sleep now.
  • + 6
 I honestly said to my sleeping 6-month old beside me, "THAT is going to be my next bike." He didn't care.
  • + 8
 Perhaps we can elicit a production run from @RockyMountainBicycles #bringthepipedreamtoproduction how many deposits would you need to spur a production run? #letsmakegreataluminumbicyclesagain #linkageplates
  • + 4
 @nuttypoolog: Perhaps we can elicit a production run from @RockyMountainBicycles #bringthepipedreamtoproduction how many deposits would you need to spur a production run? #letsmakegreataluminumbicyclesagain #linkageplates
  • + 1
 @NWuntilirest: Perhaps we can elicit a production run from @RockyMountainBicycles #bringthepipedreamtoproduction how many deposits would you need to spur a production run? #letsmakegreataluminumbicyclesagain #linkageplates
  • + 1
 @kstrongin3: Perhaps we can elicit a production run from @RockyMountainBicycles #bringthepipedreamtoproduction how many deposits would you need to spur a production run? #letsmakegreataluminumbicyclesagain #linkageplates
  • + 2
 @partyinmypants: they could take my money. I've been trying to track down a retro purple pipe forever.
  • + 3
 YES!!! offer a small production run, with down payments up front..... ill call with a card number now!!! Although please make it a threaded BB.
  • + 5
 @shutupandride: Ive got an old purple pipe for ya! (sorry, i'll show myself out)
  • + 1
 ..
  • + 22
 How the hell do I get one of those T-Shirts? Solutions below please.
  • + 21
 The only thing missing are some Marzocchi forks...
  • + 11
 This looks like a perfect Kickstarter campaign @RockyMountainBicycles . Make a tapered headtube, threaded BB version and have folks pre-pay, production commences once xx # are bought. Pretty sure you could fill a container. No warranty, no returns. Have a premium option that Wade and Digger sign. Whaddya think?
  • + 2
 I will sign up as long as the price isn't overkill.
  • + 1
 They're making it for 2018!
  • + 1
 Definitely yes !!! A real piece of art ready to schred !!!!
  • + 12
 lmao . . as i was watching this i have a magazine beside me from 1999 that is open to a review of the pipeline . . same color
  • + 10
 You have magazines from 1999 randomly laying around?
  • + 7
 @pargolf8: a true mountainbiker would. I have 2002's still. my starting year.
  • + 6
 @SnowshoeRider4Life: Heck, I have old Mountain Bike Action and Bike mags from 1993. The glory days!
  • + 2
 @gdharries: I was 4 lololol
  • + 0
 @SnowshoeRider4Life: please tell me more about true mountain bikers
  • + 0
 @pargolf8: I think that makes him a pack rat or hoarder.
  • + 1
 @SnowshoeRider4Life: Newbie (Sorry, I couldn't resist. Yes, I am an old fart.)
  • + 12
 That's some of the best shop porn I've seen in a while, they could have gone twice as long on the machining in the vid
  • + 1
 Totally agreed
  • + 9
 I still own my purple 99 pipeline, an RM7,and a switch. They are a turning point in mountain biking when we realized bikes could do big things at high speeds instead of burning rims with v brakes on hardtails.
  • + 9
 and in the summer of 99 i went through 3 rear triangles on my pipeline...
  • + 8
 HOLY SHIT YES!! Wade Simmons and Jeff Lenosky are the riders that influenced me the most. Oh, I still have Ride to the Hills on VHS here somewhere...
  • + 9
 He should have been rocking some Roach pads for the riding segments.
  • + 2
 I still have my Core Rat Angie Wear knee/shin pads! Smile
  • + 3
 @balfadude: Yeah, I still have my Roach leg and forearm guards from 1998. They don't even stink that bad...
  • + 2
 @megaold: I've got a Roach nad pad in a box somewhere. I can't part with it.
  • + 2
 @sngltrkmnd: I gave my Roach pants to a friend last year as sadly they will never come close to fitting me again. Curses to my middle aged, fat, flabby ass...
  • + 2
 @megaold: My Raceface vintage pants still fit, the Fox one's are a total other story.
  • + 1
 @megaold: get on some hormone replacement and fix that shit! It works! Ha
  • + 2
 @megaold: I still use my old Roach legs in winter!
  • + 1
 @balfadude: rock on. I got some angie wear leg and arm still.
  • + 5
 It appears that Wade may have developed some actual acting skills and/or comedic timing. Very well done. As an added note, I still have my '99 Pipeline and I would totally consider purchasing a "Pipedream" if Rocky Mountain were to consider a production run. ....as long as they change the "baby shit yellow" to black (like I've done on my old one).
  • + 9
 I really wish that was twice as long.
  • + 8
 Rocky please make this bike available. Even as a limited edition.
  • + 6
 I remember seeing a Rocky Fro Riders video segment and seeing a magazine: Now with "100% more Canadians". And that was it I was in. I wish I could find that segment.
  • + 1
 Someone help dig this up!
  • + 6
 I'd like to make suggestion that we skip the super boost and go straight to turbo boost for the 2019 model year. And mor gussets.
  • + 8
 But but but... where are the flames?
  • + 8
 The Godfather of Freeride ....can´t get enough of these vids!!!
  • + 8
 @RockyMountainBicycles you guys continue to blow our minds
  • + 3
 i own quiet a few of those Frames and love them. However, with the upcoming of "Standards of the week" and the uniform look, i stopped wanting to buy any new frames. I think my last model year was 2013.. This frame i would buy at once, no questions asked, wonder why;-) By the way, my workhorse is a candy red Pipeline....
  • + 2
 RM make this frame for real! no joke! it would sell!
  • + 4
 I remember those lines. Particularly the BC Place stairs. Rolled up one day to check it out shortly after the original vid launched. Nearly crapped my pants at how big it was in person. Wade made it look so easy.
  • + 5
 I don't know about all you young punks, but this 48 year thinks this is the best in a long time. Might be some nostalgia that makes me think that though.
  • + 3
 OMFG!!! I'm all in... i still ride 26" wheels for all my bikes, and am sad that this is only 27.5 but I dont even care. This is my next bike... I had to even go to rock mountain to make sure they were actually going to make this not just one for wade. I havwent been this stoked to buy a bike in ages!!!
  • + 0
 so they ARE making them for sale, it's not just a 1 off for wade? seeing contradicting comments
  • + 1
 @deadbeat: this is crazy
  • + 2
 @deadbeat: "While the Pipedream is not available for purchase, this bike was a chance for us to take a look back at our history and the long term commitment to freeride mountain biking"
  • + 4
 They lost me at BB92. A bike that rad should have a threaded BB. Come on man!
  • + 1
 @deadbeat: @NWuntilirest: That's a promo page to make this faux "bike launch" appear fully legit... like an Easter egg. You can't buy this bike.
  • + 1
 @icedcoffee: Perhaps we can elicit a production run from @RockyMountainBicycles #bringthepipedreamtoproduction how many deposits would you need to spur a production run? #letsmakegreataluminumbicyclesagain #linkageplates
  • + 5
 F…k yeah! That’s rad! Love the straight tubes and cnc work. My next bike will be aluminium no doubt
  • + 2
 I feel ya, I do like the carbon, but it just doesn't have the same appeal and I think pushing forward with being environmentally friendly, a traditional alloy construction should be an option for consumers. I hope things eventually sway back to when there was the alloy options.
  • + 1
 @BoneDog: quite a mission finding a brand that has a good alloy option. Most use aluminium as the low end version of a model. Hopefully this will change with the amount of people knowing the negatives of carbon
  • + 1
 @deadbeat: Pole's top end bike Machine will be made of 7075 alloy. It is also made in Finland Smile
  • + 1
 @PetrolLungs: yea really like their bikes will have to check it out
  • + 2
 Awesome edit, I loved watching Wade in the Kranked series growning up in the 90's. For those of us that rode back then, you can remember the struggle of just trying to ride without feeling judged as mainstream MTB was very resistant to Freeride/dirt jumping back then so you were on your own more or less. There was no Rampage, Slopestyle or CrankWorks to give riders the vast media platform and exposure they have today, back then you did it because it was your passion and you hoped companies would continue to make bikes to help progress the movement and not slink back into only making traditional DH or XC trail bikes.
  • + 3
 I miss my RM7 Wade Simmons edition so much. Really shouldn't of sold that bike. Needs to be on the wall of my lounge as a homage to this man! this bike needs to stay in Ali as well. Death to carbon...
  • + 1
 i still have mine i didnt think there was another one in dorset let alone local and riding at the same spots as me!
  • + 1
 @frampo: long time ago though. miss it to bits, pedalled so well too, just mine was way too short. Its a small world really. Your's looks almost original build do. would kill to get one of those again or the RMX.
  • + 4
 @riktherider: yeah i got mine ex demo back in 2003/2004, just switched out the bars, gears and put a MRP on. unfortunately i only have the frame and shock now, i put the parts on a hardtail for a little while and it got stolen! mine was an 18" which seemed to fit me at the time. My RM7 got me hooked on Rockys and i have only owned them since! currently have a Maiden and Slayer. Im pretty sure im a lifer with Rocky now.
  • + 3
 2017 has become the year of @scottsecco......another one completely outta the park on this one! Rocky please build this bike and Pinkbike thank you for content as good as this for free!
  • + 6
 "I got one word for ya - "linkage plates"." Awesome...
  • + 6
 my brother says he's totally washed
  • + 6
 The Roach pants really tie the room together
  • + 3
 WOW! I would def be down to buy this if it was produced. And the vid was awesome. Roof Drops, stair gaps and wade in a ride to the hills shirt! LEGENDARY!
  • + 3
 Isn´t that what is Nicolai Bikes has doing meanwhile all the time? Drilled linkage plates.....

But yeah, I would be interested! Like the P.A.I.N.T.J.O.B.
  • + 3
 The Slayer and the Pipe dream. Could be the name of a block buster movie. Just happens to be the name of a couple of Rad Rockies. Respect!
  • + 4
 Wow, first bike I've seen in a while where I actually want that! Limited run @RockyMountainBicycles ??
  • + 2
 VOD. I'll never forget the succession of Rockys I had after being exposed to BC trails while working in a shop that carried them. Reaper, Pipeline, (original) Slayer, then an RM7.
  • + 1
 dude. what a dick tease having it on their website like an actual bike. i cant tell you how obsessed i was with rocky bikes and wade simmons when i was in elementary school. ESPECIALLY the RM7 he was holding up with lime green flames. ah those were the days. they should add a replica old school colorway to each model they make, font and all. too good
  • + 4
 Cancer already took my right nut, but I'd give my left nut for this bike. Holy. Shit.
  • + 6
 Fro-Rider sticker Smile
  • + 6
 Made my day!
  • + 5
 Linkage plates, making freeride great again.
  • + 5
 @scottsecco you nailed it! Such a great video.
  • + 4
 Finally, a bike with a soul, built by a craftsman who loves and knows what he s doing.
  • + 3
 Talking about, making mountain bikes cool again! Ha! Hope they start making their own bikes again, that would make it even more nostalgic.
  • + 5
 Ok, it's been fun, but can we go back to high end aluminum frames now?
  • + 2
 yes, please!
  • + 1
 I loved it. But seriously, no URT? He did a bunch of his iconic moves on the old Pipeline, which also had a lot of weird plates. If anything this new bike is most like his old DH Race with a Pipeline paint job. I'd like to see him hit one of those truck trailer drops at the PNE with a URT again.
  • + 1
 Am I the only one who finds it annoying when they slap the videos in there at a full screen size? Despite having 1080p monitor it still cuts off a bit and i have to re-open the original video for a more enjoyable viewing experience
  • + 4
 dope concept, reminds me a bit of what devinci did with the YYZ.
  • + 1
 Perhaps we can elicit a production run from @RockyMountainBicycles #bringthepipedreamtoproduction how many deposits would you need to spur a production run? #letsmakegreataluminumbicyclesagain #linkageplates
  • + 1
 So sick! I think if Rocky handmade these to order in Canada like this...and even if you needed to have invested in Bitcoin 5 years ago to afford one, they would still sell a bunch of these!
  • + 2
 Love it. Stoked to see this in person tonight at the screening of The Moment. Tomorrow I'm gunna go shred the shore on my rocky and pretend I'm Wade...
  • + 3
 I kind of wish Wade was my older brother. But I'm older than him so that's not going to work.
  • + 2
 I just want a new copy of Shift, my VHS copy has died due to being over-played. @WadeSimmons @bretttippie , hook a brother up!!
  • + 2
 Good to see that the Grandfather I mean the Godfather still can rip up the old school still better than 99.9% of us commoners.
  • + 3
 Wow, a new generation weapon with an old school skin... consider mass production, RM?
  • + 2
 Classic, reminds me of going off my friend's garage roof on lunch break at school.
  • + 3
 Pinkbike nominee for best acting in a mountain bike film!
  • + 2
 Yes scott another amazing edit! Stoked to see you always trying new stuff, very entertaining!
  • + 3
 Stair gaps and skate parks FTW!
  • + 2
 This vid got me so hard for summer, I think I am about to have an Aneurysm.
  • + 1
 Oh my god this was awesome! Pipe dream reminds me of the pipeline from Kranked 3, one of the best movies ever made. Simmons is legendary!!!
  • + 3
 My heart is full! Love you Wade and Rocky!!!
  • + 2
 Best way to start a day ever......and that bike would look rad in RM6 black and red!
  • + 1
 So good. Old school. I am officially old. Time to buy some "just for men". Brush it in and I will be hucking to flat again in no time!
  • + 3
 give it coil shocks and its a dream bike
  • + 3
 Awesome...

Where can we get the "Ride to the Hills" T-Shirt? Smile
  • + 3
 It's like a retro-rod build. Rad!
  • + 1
 I am proud that still own one RM7 Wade edition. Well its broken... again, but will fix it and have fun with that piece od MTB history.
  • + 1
 Love this video!!! Stokes the fire inside me for Mountain Biking!!! @rockymountain please sell this frame to us commoners. Great job!!!
  • + 2
 You can buy *nearly* that bike right now. NS Bikes Soda Evo.

m.vitalmtb.com/community/silvbullit,16976/setup,31421
  • + 3
 This is the best video that has ever been made
  • + 1
 So is it me or does Wade look Mark Hamill? Make your jedi references if you agree...
  • + 1
 The bash needs to be on both sides of the chainring with two little orange wheels just like old times.
  • + 2
 Urban freeride makes its return...Double stair set FTW!
  • + 2
 Haha! This was so good, such a good feeling.
  • + 1
 I love this thing. Please Rocky, sell some of this things. I would like it most with 26''
  • + 3
 Bike of the Year!!!
  • + 1
 I was soo hoping to see a thrust link, but beautiful bike none the less. I'll be buried with my RMX!!
  • + 2
 and then they ruin it with Pressfit...
  • + 1
 My thoughts exaclty!
  • + 1
 Love it! Man I feel old, but glad I'm still riding to appreciate this vid!
  • + 2
 I must be getting old because I loved this!
  • + 1
 That just made my morning! Always dreamed of a RM7. Loved the old footage and the new old school freeriding...keep it coming
  • + 1
 i hope there going to put this in to production this could be my new bikeeeeeee and wade simmons just feckingggg rocks Smile
  • + 3
 Boner achieved!
  • + 2
 Sure it can't fit a water bottle but I would buy that bike.
  • + 1
 Might have to think about trying to rebuild the old Pipeline. That got me right in the feels.
  • + 1
 This is what got me through high school!! I would totally but that bike again!
  • + 2
 Bad ass! Make a full movie out of this please!!!!
  • + 2
 Rocky!! You killed it! Awesome!
  • + 1
 Hey guys feel free to help me buy one: www.pinkbike.com/buysell/2297064
  • + 2
 Such a sick video. It gets better every time you watch it.
  • + 1
 Please make this bike!!! I sold my purple and green Pipeline a long time ago and still regret doing it. I want that rig!
  • + 1
 the rm7 was my first dh rig and i loved it! should not have gotten rid of it
  • + 2
 THAT. WAS. AWESOME!
  • + 1
 Anyone else notice the Raceface Atlas wheels he's running? possible prototype for a good free ride option from them?
  • + 1
 THE GODFATHER!! Wade can still throw down! It'd be great to go for a ride with him, then a grab a pint after.
  • + 1
 What a classy throwback, great project Rocky and of course Wade! To the hills!
  • + 2
 best looking bike in the last 10 years...
  • + 2
 That's a fuc**g impressive piece of art!
+1
  • + 1
 Such a sick vid!! Best I’ve seen for a while, and as for that bike- WOULD BANG!!
  • + 2
 I saw him in a IFHT video, he´s a mountainbiker too
  • + 2
 Still such a bad dude on a bike! I love it!
  • + 1
 Anyone notice Wades old school ROACH Freeride pants??
  • + 1
 My RM7 Slays the hills and Reaps of radness.
  • + 1
 Roof drops, stair gaps, loved those features in old clips. Pure awesomnes!
  • + 1
 Godfather of Freeride!! Don't you forget it!
  • + 1
 I have a RM7 to, but is it the blue model, but it's very cool to !
  • + 1
 Love the video, great idea! Great riding still from the legend himself!
  • + 1
 vid needs more riding but danngggg that bike lookin fresh
  • + 1
 One word for yah....fuckin sick!!!
  • + 2
 PARTY ON WADE!!!
  • + 1
 If you say old school, than you should be using 26"
  • + 1
 Kick that Pussy out of Ottawa! Wade for PM!!
  • + 1
 FK YEA! roach gear! best gear! still rockin my dh pants and shorts!
  • + 1
 Wade Simmons “you’re so cooool”( in an Eric cartman voice).
  • + 1
 Well done ! Bike of the year !
  • + 1
 Those ROACH pants! boy those bring back some memories.
  • + 1
 i want one. fucking amazing
  • + 1
 Oooohhhhh my god this bike is THE SHIT....
  • + 1
 Make it available and it could be my first RM bike ever! Smile
  • + 1
 Yes absolutely more aluminum beef!
  • + 1
 ...the cult comes back...
  • + 1
 Please @rockymountainbikes sell these and take my money now!!! So Hot
  • + 1
 Good looking bike, and quality content.
  • + 1
 I'm not too psyched with the color scheme but I still want one!
  • + 1
 its listed on the Rocky Mountain website! maybe they are producing it!
  • + 1
 This is so rad. Linkage plates!
  • + 1
 please produce that bike! (Maybe with the classic canuck paint job!)
  • + 1
 this is so over the top RAD ..... love it! Nice work Rocky!
  • + 1
 Website says: "not available for purchase"
  • + 1
 Nice riding, some amazing trails, where are they?
  • + 1
 Where do I order the Pipedream?
  • + 1
 Old school color and frame material, I like it!
  • + 1
 1:48 I'm putting this sticker on everything.
  • + 1
 Yes! Make it Wade replica with the green flamming and I'm in
  • + 1
 Ledge!
  • + 1
 Super boost
  • + 1
 Wade Simmons is the MAN
  • + 1
 what a huge project!!!
  • + 1
 2 words - Thank you
  • + 1
 cypress?
  • + 1
 Amazing.
  • + 1
 good video! cool bike.
  • + 1
 Freeride lives!!
  • + 1
 Just great
  • + 1
 YEESSSSS
  • + 1
 Simply... LEGEND!!!????
  • + 1
 WADE IS THE BOSS!!
  • + 1
 More Green Flames!!!
  • + 1
 So many feels
  • + 1
 Oh fuck yes!
  • + 1
 That was awesome!!!
  • + 1
 F*kin rad!
  • + 1
 that is a sick bike!!!!
  • - 1
 Such a cool idea. What was the wheel size?
  • + 1
 looked like 27.5" since that is now standard and those definetly werent 29" but if they were really going for the "retro" style they would been 26" but im leanig twoard 27.5"
  • - 3
 when is it coming out ? will it be available in ocean fill ?
  • - 2
 i wish the paint job was black....

Post a Comment



Copyright © 2000 - 2018. Pinkbike.com. All rights reserved.
dv56 0.142485
Mobile Version of Website