ONE+ 44T | Stjavascript:;ep-by-Step Installation Guide.
【 Step 1 】
- Remove your XX1/X01 cassette from your bike.
【 Step 2 】
- Remove the 42T by using a flat head screwdriver.
- Insert the screwdriver tip between the 42T and the 36T sprocket.
- Gently twist the screwdriver nd then move clockwise around the cassette.
【 Step 3 】
- Aligning ONE+ 44T and must be correctly aligned with the X-DOME™.
- Insert this pin into the biggest hole onto the ONE+ 44T.
- All of the 18 pins should now be sitting on the holes on the ONE+ 44T.
【 Step 4 】
- Press fit the ONE+ 44T onto the X-DOME™ with a hammer.
- Move around the cassette clockwise tapping each of the 18 pins into the ONE+ 44T.
CONGRATULATIOINS | 100% WELL DONE ~
#macmahone #44T #sprockets #taipeicycle #mtb