Register New User
Add to Favorites
You must login to Pinkbike.
Don't have an account?
Shadow plus mod. 9spd sram shifter and drivetrain. 1/4"washer with slot for cable cut down to .236"
Photo 1 of 3
Parts - Drivetrain
Jan 23, 2013 at 7:27
Jan 23, 2013
Kensington, Maryland, United States
150 x 113
250 x 188
500 x 375
800 x 600
1024 x 768
1600 x 1200
3264 x 2448
Apple iPhone 5
(Feb 20, 2013 at 20:06)
Going to order one up in the next couple weeks, thanks again for guinea'ing this one dude.
I assume you're running a 9sp chain? Sram or shimano? Not that it matters much, but I'd prefer to duplicate your setup if possible, since it's now known to work.
(Feb 21, 2013 at 6:14)
@ A300hp - I was pretty psyched it was so successful. And just for the record, this was not my original idea. Steevoo on MTBR pointed me in the right direction here. His specs were spot on. He deserves all the credit for this one.
Yes - the drivetrain is sram 9spd aside from the rear derailleur.
(May 30, 2013 at 0:07)
sweeeeeet... i read this in the xx1 post.. this makes me so happy !
i can get a second hand mech from a friend,. the only problem is that i need to look for a sram shifter..
Shimano mech with sram shifter.. (the Shimano shifter will not work in this way ???) right ?
(May 17, 2016 at 15:54)
I want to run a 9sp chain (stronger vs 10sp) on a 9sp cassette (lighter than a 10sp) with a 10sp only shimano zee rear derailleur. Is this all I need to do so my 10sp ZEE derailleur index shifts correctly for 9sp cassette spacing? Of course running a 9sp Saint shifter--or do I have other options?
(May 31, 2016 at 4:37)
- The shifter needs to be a sram 9spd model for this to work. The 9spd shimano derailleurs have a different pull ratio than the 10 spd group. The 10spd shimano rear derailleurs have a very similar pull to the sram ratio. The little spacer block tunes the pull ratio on the shimano 10spd der to almost identicle to the sram ratio. I doubt the saint shifter you plan on running will work.
(Jun 5, 2016 at 21:15)
(Mar 1, 2013 at 8:43)
Thanks man great great idea! Well, nice application of a great ideal by the guy on MTBR!
(Sep 3, 2013 at 10:37)
Thanks for passing the idea on. I set it up on my Enduro last week and it's great!
(Jan 23, 2013 at 11:34)
.236" is 6mm for the metric crowd
thanx for posting this
(Jan 27, 2016 at 9:49)
Will this with with a xt 9 speed shifter?
(Jan 23, 2013 at 12:17)
Post a Comment
Submit a Story to Pinkbike
Pinkbike RSS Feed
Copyright © 2000 - 2022. Pinkbike.com. All rights reserved.
Mobile Version of Website