Added 3 photos to Buysell
Jan 27, 2019 at 4:03Jan 27, 2019
Jan 27, 2019 at 4:01Jan 27, 2019
A set of Hope hubs in blue with a Stans Flow mk3 on the front, Arch mk3 on the back. Taped up for tubeless with valves. FRONT - 32h, black DT Swiss spokes , Prolock brass nipples, 20mm axle, 100mm spacing (non Boost) Blue Hope Pro 4, Stans Flow MK3 (29mm internal) Rear - 32 h. black spokes, prolock brass nipples, 142mm axle (non boost) sram xd driver (was used 11 speed) Hope Pro4, Stans Arch MK3 (26mm internal) These wheels were a back up and have been hardly used. No dents at all, a couple of v.small scratches in the decals and the bearings are perfectly smooth. All adapters are available from Hope (and others) to convert to boost, 15mm front etc. Would prefer a local/ pickup but will post at cost if required.
Posted in "Orbea Rallon sizing"
Jun 16, 2018 at 2:15Jun 16, 2018
Added 10 photos to Capra
Jan 27, 2018 at 9:46Jan 27, 2018
Jan 27, 2018 at 9:43Jan 27, 2018
2014 Capra Pro Medium Bought 3 years ago. - I'm the only owner since new. I've just removed the copter tape applied on the frame and forks (gets looking tatty around the edges) so in very good condition. Some small scuffs on the decals on the chain stays. Used mainly in the dry/summer. It is back to as original as possible with the exception of: Bars replaced for carbon Rentral Fatbars 780mm. Saddle, Charge Scoop ( same as Fabric Radius Race with Ti rails) Rear shock, Rockshox Vivid R2C coil shock ( the buyer has a choice of this shock OR the original BOS Kirk air shock - serviced by Jtech but never placed back on the bike) Bos Deville Air forks 170mm (Jtech serviced 2017) Sram X01 11 speed drivetrain Avid Trail X0 4 pot brakes (same caliper as Sram Guide) 200mm disks f&r Rentral stem Crossmax Enduro wheels - only used for 1 year Rockshox Reverb 150mm seatpost The bike was last used in July 2017 and is now being sold as no longer needed. Any questions, please ask.