B-pal

Just refreshed the suspension on my bike so I'm moving this fork along to someone who will put it to use. This was on my Yeti SB130 and was my primary ride for a good while. -2019 Fox 36 Factory 160mm 44mm offset, GRIP2 damper. -7 5/8" steerer tube -Has the super-common creak at the crown-steer junction, so expect to hear that whenever you come down super hard on the front end. -Couple of stanchion dings -Just completed a lower leg service with fresh oil and seals about 3 riding hours ago. Rebuilt by Greg @ Butter Suspension a couple of years ago. Perfectly ridable as-is. Don't expect this to feel like a brand new fork for $150 though! Good for a backup or for putting a bike together on the cheap. Local pickup only in Bellevue WA

Like new Bafang BBSHD E-Bike motor. I bought this new from Luna Cycle (at around $800 total cost). It's only been used for 16-20 miles. This thing is a ton of fun, I just realized that I ride bikes for the pedaling and E-Bike didn't really do it for me. Comes with everything needed to install on bike - works perfectly . Set up for 68-73mm bottom bracket (very typical) "Hot Rod" program (1500 W max power) 750C full color display 40T chain ring Prefer local pickup but will ship at buyer's expense.

Formula Oro brakes for sale - had these on my downhill bike for a couple of years and really loved how they rode, but ran into an issue where the rear was getting a little sticky and not retracting adequately, causing a bit of drag on the rotor. In a moment of desperation to get going again I removed the pads from the rear caliper in a Whistler hotel parking lot to get the pistons moving a bit to see if that made it less sticky and one of the pistons popped out for a second, leaking fluid. I swapped brakes with another bike I had to get back to lapping Dirt Merchant and haven't messed with it since then. Front hose is ~36" long and rear is ~57" Definitely sold AS-IS with no claims of function or what is needed! No idea if these just need a bleed and some use, or if a more serious servicing/rebuild is needed. Not sure why ad is saying condition is good/functional when I have Poor - Needs Servicing listed. Will ship in USA/Canada at buyer's expense (should be 10-15 USD)

Pair of excellent condition Shimano M9000 levers with carbon levers. Used for a few months. Will ship anywhere in USA for $10.

Pair of M820 Saint brakes. These calipers were used for a few months, so are close to new. Levers are brand new! They will need a bleed since I just installed the levers (I used XTR levers with these calipers to save a little weight) Rear is 54" from where hose joins the lever to the center of the banjo bolt, front is 29". $10 for shipping anywhere in USA.