BenKenobi

Selling my Gambler due to riding injury. It's been ridden a fair bit, and it certainly has a few marks from rock chips and strikes. Never been crashed hard, laid worst it's had was getting laid down after washing out in a berm. Spec list: Fox 40 FIT4 Performance Elite Fox Van RC Syncros Downhill wheelset Syncros Downhill cockpit SB-ONE Boner singlespeed kit Shimano Saint cranks and pedals Shimano brakes MRP bashguard Pros: Fresh tires, three days of riding Set of Onza Greina DHC tires will be included, one brand new, one with half a day of riding Rear brake pads replaced not too long ago, ridden around 5 days Shorter Raceface Atlas DH handlebars included, in case the current 800mm one is too big Almost new Reverse Components bashguard included Can include a Rockshox Reverb if one were so inclined to ride uphill Cons: Bashguard took a beating and has a chunk taken out, will be including a different one for that reason. Current one can be ridden no problem, but it doesn't look too good in it's current state. Spoke on front wheel has to be replaced, as I fucked up taking the bike off the gondola once. Has a slight wobble for that reason Rear wheel has a quite a wobble. Perfectly rideable, rode this season no problem the way it is. Saddle is scuffed up, no problem to ride of course, just should be pointed out Absolutely bombproof rig, aluminium parts with Fox suspension is a great combination for a simple yet effective bike park ripper in any conditions. If wanted, I have a Rockshox Boxxer I could sell for a bit more, it's quite a bit lighter than the Fox 40s. Also have a set of Code RSC that need to be reconnected and rebled that I can include for cheap. Message me for any more pictures. I'll ship this fucker to Antarctica if you pay for postage.

Selling an X2. Looks to be in good condition, never had a chance to try it out properly. 22x75, will fit a GT Fury, Santa Cruz V10 and others.

Selling a used DH fork in decent condition. Bought it used for a project that I sold before ever getting to install them. They seem to work perfectly fine, though I haven't had a chance to actually test them. I'll try to get them installed on a DH rig soon to test them properly. Has some scratches, absolutely nothing major. Can send videos of fork compressing if wanted. Will upload better pictures in the next few days.