Bleu
- Member since Jul 25, 2013
- Roanoke , Virginia
- 0 Followers
- 0 Trailforks Points
Recent
Selling
Jun 17, 2021 at 6:08
Jun 17, 2021Fox 34 Factory w/ Syncros Fender 140mm 44mm Offset
$600 USDAbout a season of riding on this fork; I upgraded to an MRP Ribbon Coil.
140mm travel, 44mm offset.
Some very small scratches on the left stanchion.
Steerer is cut to 7.5” (image shows closer to 7 6/16, but crown race was still on when I took the picture).
Free shipping in the Continental US.
Selling
Apr 19, 2021 at 15:06
Apr 19, 2021Ibis S35 Aluminum Wheels
$300 USDAbout a season of wear.
Ibis hubs with Shimano microspline driver.
One small dent in the rear rim, but tires seat up easy and it runs fine.
Both wheels spinning true.
180mm rotors are included.
Selling
Oct 30, 2019 at 10:57
Oct 30, 2019Fox DPX2 Factory EVOL Metric 210 x 50 - Free Shipping
$300 USDCame off a Yeti SB5 LR. No scratches or damage to the shaft, and relatively light wear. Ships free in US.
Selling
Oct 30, 2019 at 10:42
Oct 30, 2019Thompson X4 50mm 31.8 - Free Shipping
$40 USDNew bike take-off. Needed a shorter stem to get the fit right. Same condition as when it left the box. Will ship free within US.
Selling
Sep 21, 2019 at 14:47
Sep 21, 2019Yeti SB5 Lunch Ride X01 w/ Upgrades
$3100 USDPriced to sell: $3100 shipped. This bike has seen two seasons of riding, but it’s in good shape and ready to rip.
Selling because I think a more XC-oriented 29er is more appropriate for my trails and riding style, and I can’t afford to own two bikes.
Customizations/upgrades/extras:
- I just put new tires on it - 2.6 Magic Mary up front and a 2.5 Aggressor in the rear.
- I also got this bike set up with a Fox DHX2 coil shock with a 600lb spring (less than 50mi on this shock). NOTE: You can choose between the new DHX2 or the DPX2 that came stock on the bike.
- Recently added Ergon GA3 grips, which I really like. I’m also happy to throw in the stock grips.
- Added a Syncros bolt-on fender to the Fox Factory 36.
- Also upgraded dropper remote to Loam Lever, which was 100% worth it and something I’ll totally do for my next bike.
- Including a fresh set of bearings and a Yeti grease gun for the switch infinity linkage.
Overall spec:
Frame: Large SB5 Carbon Turq Series
Fork: FOX Factory 36
Shock: FOX Float DPX2
Wheelset: DT Swiss 350 with XM481 rim
Derailleur: SRAM XO1 Eagle
Shifter: SRAM XO1 Eagle
BB: SRAM GXP BB92
Cassette: GX Eagle 10-50t
Chain: GX Eagle 12sp
Brakes: SRAM Guide RSC
Dropper: FOX Transfer 150mm x 30.9
Headset: Cane Creek 40
Stem: RACEFACE Turbine 35x50mm
Bar: Yeti Carbon (cut to 770mm)
***pedals not included
The bike has a few scratches and dings as a used bike will have, but nothing serious. The fork does have a small scratch on the drive-side stanction, the scratch is not through the Kashima and not harmful to the fork. I have kept up with the frequent maintenance. The bike has been awesome! Message with me for any questions.
http://www.yeticycles.com/bikes/sb5-lr/specs