Nov 26, 2020 at 18:40Nov 26, 2020
2013 Cove Shocker in size medium - What you see in the photos is what comes with the sale. - Frame in very good condition, no cracks, no dents. Minimal scratches from regular use, but nothing that takes awaya from the riding experience. - Comes with Raceface 83mm BB which is in good condition, as well as a bottom bracket chain guide mount. - Bearing cups are still pressed into the headtube, they are in good condition, with no scratching / pitting etc. - Discoloration on frame is just 3m clear tape applied to prevent cable rub in certain areas. Easily removed if wanted. - Rear travel is a maximum of 8.5'' or 216mm (It may be up to 8.75'' if memory serves me right). Ideally this would suit someone wanting to build up a retro freeride or dh rig, the frame isnt light but it's very strong! Will accept reasonable offers. I just want to see it go to a good home. Thanks for looking
Nov 26, 2020 at 17:13Nov 26, 2020
Mavic EX721 rim 32H - Believe it is laced to a DT swiss hub, no stickers on hub though so cant tell. Runs very smooth - Comes with Shimano XT Deore cassette (CS-M771-10) 11 tooth to 25 tooth. Excellent shape - Older 2.5'' Maxxis high roller and tube included - 12x150mm TA Message for details Note, had to enter in a measurement for the front axle, even though I am only selling the rear. Thanks!
Nov 26, 2020 at 17:00Nov 26, 2020
Shimano Zee 10 speed derailleur, short cage - Good working order, operates correctly, clutch system works well - Idlers spin freely Can include shifter for an extra $10 Message for details.
Nov 26, 2020 at 16:56Nov 26, 2020
Selling a Obtainium spring, which is titanium construction. Very good shape. - 375lb shock rate, with a 3'' stroke - ID: 38mm - OD: 56mm - Overall length: 150mm - Believe this spring weighs 413 / 414 grams - Cost new was $300ish - Was used on a manitou shock Message for details.
Nov 26, 2020 at 16:40Nov 26, 2020
Shimano 180mm rotor, non icetech -Good condition, thickness is still near new -No mounting bolts included Message for details
Nov 26, 2020 at 16:32Nov 26, 2020
Raceface Single NW chainring - 32 tooth, used on a 1x10 setup - Fits 9, 10 and 11 speed drivetrains - Minimal use - 104mm BCD Shoot me a message, thanks for looking
Nov 26, 2020 at 16:25Nov 26, 2020
Thomson Elite seatpost - Cut down to fit specific bike, verify with image to see length of seatpost - No mounting hardware for seat included - 30mm OD
Nov 26, 2020 at 16:20Nov 26, 2020
Shimano Saint FC-M810/M815 cranks - Very good condition, minimal use - 170mm length - Fits 83mm bottom bracket - No chainring / bottom bracket included in sale
Nov 26, 2020 at 16:11Nov 26, 2020
Selling a pair of good working red Crankbrothers Mallet DH pedals. Some cosmetic finish wear and a few scrapes from the odd rock, but nothing that affects using them. Price new is $170 Washers are included. Thanks
Cheever davispotozny's photo
Dec 24, 2011 at 15:59Dec 24, 2011
Photo by bradwalton