Chris3225

This is a rockshox recon 140mm that came stock on my Santa Cruz 5010. The steerer tube measures 8.5 inches or 215mm and will fit most (if not all) bikes. This fork is in great operating condition only a few scratches on the lowers. The decals are starting to peel off, but other than a couple minor scratches, that’s it. The Stanchions have very small vertical scratches on the right side, but cannot be felt with a fingernail and do not leak. Text me with any offers or potential trades

This is a Rockshox Judy off of a 2020 trek roscoe 7. This fork was used for about 6 months before being upgraded. This form is in good working order. A couple things to note are some very very small scratches on the top of the air side stanchion, but then can barely felt with a fingernail and do not affect performance. These were pictured above but they are hard to see in both real life and the picture. The other problem is when rebound is fully open it will make a noise upon extending back to full travel but rockshox had said this was fine, and when rebound is set at any other setting it does not happen. Riding at rebound fully opened is not recommended as it is way to springy, but it is totally fine if you do. There are a few scratches on the decals but those can easily be swapped out or just removed to suit whatever look you are going for. Steerer tube at 6-3/4”, 44mm offset, 29” wheel (or 27.5+ like how it came)

This is a new Santa Cruz 5010 v3. The reason the price is at this point is that there is a small dent the size of a quarter in the bike that goes in only 2 or 3 millimeters. There are also a couple of scratches as seen in the photos. I am open to offers as I am not quite sure how much a frame in this condition would be. It was never ridden, it came out of the box with the dent and a few of the scratches were put on while removing all the components from the frame. It comes with the custom tuned fox dps performance.