PRESS RELEASE: ChromagWe launched our first alloy handlebar in 2003. At the time it was one of the widest bars on the market at 720mm. The OSX developed soon after and the width of the bars increased. We've kept the geometry of the OSX the same over the years because it just works and feels right to us. Coming up with new graphics for our bars has always been a fun part of the design for us as well as using a lot of different colours and finishes.
2020 marks the fruition of several new features and advancements resulting from new design ideas, new technologies in fabrication, and expanded capabilities of our manufacturing facilities.
We've brought the gold OSX back for 2020
For 2020 the OSX has seen a major overhaul, with several updates and significant improvements in feel, strength-to-weight and overall performance. We’ve retained the essence of OSX geometry with a 25mm rise, a 5° upsweep and an 8° backsweep; however the length has increased to 800mm. By refining the shape, and utilising variable butting, high grade alloys and advanced heat treatment techniques, we have increased the fatigue life by over 50%. So much so, that we’ve seen fatigue test results reach over 1 million cycles.
HTX - Advanced Heat Treatment The term heat treatment gets thrown around a lot, but most of the time the word consistency doesn’t come along with it. Depending on the batch an individual bar might be subjected to vastly different temperatures during the process. HTX ditches the disparity and provides uniform, quality heat treatment on every single bar.
Refined Tube ShapeA longer, more progressive taper between diameters reduces stress risers through the dimensional transitions. By increasing the tapered sections and using a larger radius we have inherently built more strength into the shape of the OSX.
New green ano for the 2020 OSX
7000 Series Aluminum AlloyWe use aerospace-grade aluminum to achieve our required properties of strength and toughness, with added resistance to stress and corrosion.
Variable ButtedVariable butted wall thickness optimises strength in areas where needed, while maintaining flex for a great overall feel and optimised weight.
The original standard-setting Chromag bar, refined… now in its 8th iteration!
31.8mm clamp
800mm wide, 5° upsweep, 8° backsweep
25mm rise
7000 series alloy with variable butted wall profile featuring advanced heat treatment
OSX 35Our burliest alloy bar has improved again with construction and material updates plus the addition of a 35mm rise option. The new OSX35 features a variable butted profile increasing strength where needed, through the bends, while adding compliance for a better feel and fatigue life several times the current accepted standard. It’s the bar of choice for riders at high levels who are fitting to a 35mm interface and need the highest quality and performance from an alloy bar.
OSX 35 bar with the BZA stem
35mm clamp version of our OSX layout
800mm wide, 5° upsweep, 8° backsweep
Available in 25mm and 35mm rise
7000 series alloy with variable butted wall profile featuring advanced heat treatment
FU40For 2020 the FU40 sees improvements in outside shape, with longer, more progressive tapers, our new Variable Butting Technology, and improved Advanced Heat Treatment process.
With more height up front the FU40 offers a position many riders are looking for today. Our new forming methods, material and heat treatment technologies make the FU40 one of the strongest, most reliable handlebars on the market today without sacrificing feel or being over weight. In short the FU40 packs in all the same tech as the OSX, but with more rise.
31.8mm clamp
800mm wide, 5° upsweep, 8° backsweep
40mm rise
7000 series alloy with variable butted wall profile featuring advanced heat treatment
FU40 bar with the Ranger stem
Visit
chromagbikes.com for more info.
(Chromag already makes the best kids platform with lowest Q-factor)
@WAKIdesigns : Yes I would recommend the bars. The pedals are OK, not nearly as sweet as the Chromag's. The seat is good too.
Don't know about availability across the pond but Protaper J-Unit bars are narrower at 680mm but have thinner grips and pretty decent weight.
Because there is no shortage of good, inexpensive, light bars with shorter widhts in the XC section of every large retailer.
Should I match with a green stem or go gold or black to contrast?
www.matweb.com/search/datasheet.aspx?MatGUID=a8298bba8d02486c97c06990a3c215d9
Plus ergon grips
23 and 18 are definitely way overkill for regular mtb use, but try out a 12* bar and you probably won’t want to go back.
Hmmm interesting. I’m not putting around on XC trails with my 12* bars, and actually have a handful of downhill KOMs running them. Definitely a preference and body geometry thing.
I would like a bar with 2/3 upsweep and 6? backsweep.
Also what does it mean "Variable Butted"?
Is it double butted? Triple butted?
in 2003 there were several bars 760-780 and even 820 rental triple xxx.
Why no 35 with 40mm rise ?